29.4 is a positive decimal number.
Rounded to the nearest ten so that the units (or ones) are removed it becomes 30.
If the question refers to presenting this number without any figures after the decimal point then it can be written as 294 x 10-1
0.102
It is a 294.'54'% increase recurring decimal '54'
The numbers that divide into 294 are its factors. These are 1, 2, 3, 6, 7, 14, 21, 42, 49, 98, 147, and 294. Therefore, any of these numbers can be used to divide 294 without leaving a remainder.
8 294/1000 = 8.294
420 / 70 = 6Converting decimal to a percentage: 6 * 100 = 600%
There are 294 such numbers.
2.94
0.102
There are 25.4 millimetres in one inch. Therefore, rounded to two decimal places, 294 millimetres is equal to 294/25.4 = 11.57 inches.
There are 2.54 centimetres in one inch. Therefore, rounded to two decimal places, 294 centimetres is equal to 294/2.54 = 115.75 inches.
It is a 294.'54'% increase recurring decimal '54'
V = 343 units cubed.
14.7/5 = 2.94 = 294% (move the decimal point two places to the right and put the percent symbol)or14.7/5 = (14.7 x 20)/(5 x 20) = 294/100 = 294%
The '4.2' in the question is a bare number without units.We can give an answer only if we assume the units of the '4.2'.Let's assume it's 'meters per second2'.F = M A = (70) x (4.2) = 294 kg-m/s2 = 294 newtons
The numbers that divide into 294 are its factors. These are 1, 2, 3, 6, 7, 14, 21, 42, 49, 98, 147, and 294. Therefore, any of these numbers can be used to divide 294 without leaving a remainder.
8 294/1000 = 8.294
420 / 70 = 6Converting decimal to a percentage: 6 * 100 = 600%