455 rounded to the nearest ten is 460. 455 rounded to the nearest hundred 500.
500
300 billion times 455 is equal to 136500000000000.
5 can go into 455 91 times with no remainder
The Pontiac 400 has a bore of 4.12 and a stroke of 3.75. The Pontiac 455 has a bore of 4.15 and a stroke of 4.21. The 455 cylinder heads will have larger combustion chambers than the same year 400 heads to achieve comperable compression ratios on the larger engine. The blocks are physically the same size, but 455 has larger main bearings than the 400. 455=3.25 400=3.00, so crankshafts will not interchange. Cams,heads,intakes,exhaust,connecting rods,push rods,rocker arms...etc will all interchange.
If you mean the difference between the Pontiac 400 and 455....the differences are the bore size, the crank stroke length, and the main bearing journals. All are bigger on the 455. However, there is also a small block Chevy 400....which has nothing the same as the other two. The Pontiac 400 has a bore of 4.12, stroke 3.75 and 3" main journals. The 455 has a bore of 4.151, stroke of 4.21, and 3.25" main journals.
A 1974 Oldsmobile 455 V8 has horsepower of 275 to 400. The Oldsmobile 455 was last produced in the year of 1975.
Yes you can...the 400 is the same engine as the 455...all you need are 455 frame mounts and motor mounts if you car had a small block V8 (340)...if it had a 400, a 455 bolts in perfectly since it is the same as a 455 externally!!! Year One, Inc. and TA Performance has whatever parts you may need.
500
455 ÷ 5 = 91
# the 400 had 225 horse ..........the 455 had 250 horse.
13 35 goes into 455 13 times.