50x10 use multipication = 500
50x10=500
500 that is it ask again if you have more to say
500x.1=50Quick check-50x10=500It is 50
50x10;; 250x2;; 125x4;; 100x5;; 500x1;; 25x20
50x1031x1.6x10 raised to the power -19 coulambs
50x1=50 And just keep adding 50 50x2=100 50x3=150 50x4=200 50x5=250 50x6=300 50x7=350 50x8=400 50x9=450 50x10=500 50x11=550 50x12=600
50 times 10 to the 4th power is the same as (50x10)^4 which is actually 500x500x500x500 which equals 62,500,000,000 (sixty-two billion, five hundred million)
60 sq ft is an area. It could be 6 by 10 feet, or any number of different combinations.
Green, Black, Orange, (gold / silver) Green = 5 Black = 0 Orange = x10^3 50x10^3 = 50,000 or 50k Ohm
The basic d'arsonval meter movement be used to measure high-amplitude currents by placing a very low resistance across it. For instance... Let's say you want a 100 Amp meter. You have a 50 microamp meter with an impedance of 250 ohms. That means you need 99.99995 amps in parallel with 50 microamps across 250 ohms. (50x10-6)(250) = (99.99995)(x) X = 0.000125 ohms Note: At 100 amperes, that resistor is going to dissipate only 1.25 watts, but you are going to need to use fairly substantial cabling, because 0.000125 ohms is a very small value compared to the impedance of even ordinary pieces of wire.
That would work out to roughly 6 1/4 gallons. Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon.