.4017
You need the length of the rod to compute the weight. To do so, you can calculate the volume of the rod, which would be length*Pi*22 multiplied by the density of MS, which is 7.86 g/cm3, or simply 15.72(Pi)*length of the rod Mildsteel rod 40mm dia. = 9.85 kg per metre. I think that is what you asked.
8 mm iron rod 1 feet how much weight its come
A rod is an old English unit of measure that equals 16.5 feet or 5.0292metres minecraft
The weight of 1 foot of steel rod would depend on the diameter of the rod.
0.62 kg/m is the unit weight of 10 mm dia, and you use the thumb rule for all other dia unit weight per metre = d*d/162 where- d is dia of bar/rod in mm
Rolling Margin is the deviation of actual unit weight to that of Standard unit weight as per IS Standards. Rolling Margin is calculated as : Sectional weight = Weight of Steel Bars dia wise / length of the bars. As per IS Standards unit weight of the Bars is calculated as dia x dia / 162 Rolling Margin is deviation of actual sectional weight to that of IS Standard unit weight. Standard Rolling Margin for different dia reinforcement bars used for construction purposes: 8mm to 10mm +- 7% 12mm to 16mm +- 5% 20mm & Above +- 3%
.4017
weight of all steel can be calculated by multiplying unit volume with density.
1.58 kg
Unit Weights of TOR steel bars8mm dia : 0.395 kg/m10mm dia : 0.617 kg/m12mm dia : 0.888 kg/m16mm dia : 1.579 kg/m20mm dia : 2.467 kg/m25mm dia : 3.855 kg/mThese are standard unit weights in India based on the density of steel @ 7850 kg/m3
20 DIA
You need the length of the rod to compute the weight. To do so, you can calculate the volume of the rod, which would be length*Pi*22 multiplied by the density of MS, which is 7.86 g/cm3, or simply 15.72(Pi)*length of the rod Mildsteel rod 40mm dia. = 9.85 kg per metre. I think that is what you asked.
The weight of steel can vary depending on the specific type and grade. However, a rough estimate for the weight of 8mm diameter steel rod can be calculated using the formula: Weight = (Diameter^2) x 0.006165, where the weight will be in kilograms per meter.
Density = mass/volumeThe unit weight of steel is 7850 kg/m3volume of bar = (πd2/4)*Lhence mass = ((πd2/4)*L)*7850= ((3.14 *d2/4)*1)*7850 for unit length= 0.785*d2*7850= 6162.25 d2 if d is in metersor d2 /162 if d is in mm.By putting the value of diameter of rod, you can calculate the unit weight of any size tmt bar.
the weight should be change by the diameter of the rod.one rod length is thirteen meter and it should be measured in meter only. The formulae to find the weight of rod is d square /162 and you wil get unit weight then multiply it in length then u got a weight of the rod.
Wt of 12 mm tor steel, length 2500 mm