answersLogoWhite

0

What else can I help you with?

Continue Learning about Math & Arithmetic

Where does zero live?

In a gutter


What is pitch in a roof?

Pitch is a bitumen or it can mean the slope of the roof for example 1/8" per foot fall


A certain type of gutter comes in 6ft 8ft and 10ft sections How many different lengths of gutter can be formed using three sections of guttering?

Using three sections of guttering that come in 6ft, 8ft, and 10ft lengths, we can combine them in different ways to form various total lengths. The possible combinations include using the same length sections or different ones, yielding totals of 18ft (6+6+6), 20ft (6+6+8), 22ft (6+8+8), 24ft (8+8+8), 26ft (6+10+10), 28ft (8+10+10), and 30ft (10+10+10). Therefore, the different lengths of gutter that can be formed are 18ft, 20ft, 22ft, 24ft, 26ft, 28ft, and 30ft, resulting in a total of 7 different lengths.


Do you measure the top or the bottom of a gutter to determine the width?

To determine the width of a gutter, you typically measure the top edge. This measurement reflects the visible width when the gutter is installed and helps ensure compatibility with the roofing and drainage system. Measuring the bottom is less common and may not provide an accurate representation of the gutter's overall capacity or fit.


Why is 6 over 8 greater than 5 over 8?

5/8 is the same as having five 1/8s, ie 5/8 = 1/8 + 1/8 + 1/8 + 1/8 + 1/8 6/8 is the same as having six 1/8s, ie 6/8 = 1/8 + 1/8 + 1/8 + 1/8 + 1/8 + 1/8 = (1/8 + 1/8 + 1/8 + 1/8 + 1/8) + 1/8 = 5/8 + 1/8 ie 6/8 is 5/8 plus and extra 1/8 which is 5/8 plus something (positive), thus it must be greater than 5/8

Related Questions

What is the correct pitch for roof gutters?

1/4" fall per 10ft of gutter length.


Why did the gutter fall off the house?

The gutter fell off the house due to damage or wear and tear, causing it to detach from the structure.


What is the slant for a gutter system?

Rain gutter pitch should be 1/4" to 1/2" per 10'.


What is the depth of the channel drop on the bowling lane?

Gutter depths can vary, but must be at least 1 7/8" below the lane surface.


What is the lowest score that can be bowled with 8 strikes and no gutter balls?

90897


How does 1 plus 1 equals 69?

get your mind out of the gutter


How far apart are downspouts supposed to be in a rain gutter system?

This depends on several factors. 1) size of gutter 2) size of downspout 3) amount of roof area draining into gutter


What are the release dates for The Adventures of Lewis and Clark - 2013 Gutter Balls 1-1?

The Adventures of Lewis and Clark - 2013 Gutter Balls 1-1 was released on: USA: 27 January 2013


How much fall in a 8 degree roof over 1 meter?

To calculate the fall (or drop) of an 8-degree roof over a distance of 1 meter, you can use the tangent function from trigonometry. The formula is: fall = distance × tan(angle). For an 8-degree angle, the fall is approximately 1 meter × tan(8°), which equals about 0.14 meters, or 14 centimeters.


How often should I clean gutter downspouts to prevent clogs and ensure proper drainage?

To prevent clogs and ensure proper drainage, clean gutter downspouts at least twice a year, ideally in the spring and fall.


What are the release dates for Stalker Chronicles - 2010 Gutter Dolls 3-1?

Stalker Chronicles - 2010 Gutter Dolls 3-1 was released on: USA: 23 November 2010


Why gutter holes are made round and not square?

Because a round holes top cannot fall into the hole with any angle.