If you bored a 350 0.080 over It would over heat / run HOT. There would be very little cylinder wall left. You can't even BUY 0.080 over pistions.
80% of 350 = 80% * 350 = 0.8 * 350 = 280
350*80/100 = 280350/10*8 = 280
4.375
Let's say that 350 is 100%10% = 3520% = 70Answer = 350 - 70 = 280 = 80%
To find the percentage of 280 out of 350, you would divide 280 by 350 and then multiply by 100. So, 280 divided by 350 is 0.8, and when multiplied by 100, you get 80%. Therefore, 280 is 80% of 350.
If you bored a 350 0.080 over It would over heat / run HOT. There would be very little cylinder wall left. You can't even BUY 0.080 over pistions.
No a 383 is a 350 with a 400 crank. A 350 bored 60 over is 361 cubes.
a Chevy 350 bored .060 over would be 360.4 cubic inches
i have a 350 bored 40 over and 400 crank, and been told its a 383 stroker, what is it?
355
its called nothing because you wouldn't have a ENGINE left if you bored it 4" over
A 350 engine typically has a standard bore size of 4.000 inches. When it is "bored 30 over," it means the bore has been increased by 0.030 inches. Therefore, the bore size of a 350 bored 30 over is 4.030 inches.
357
5.7
yes
4L80E
355