12 feet
You are supposed to measure the "rough" opening. This is distance from the studs that line the door opening. (not from the door frame itself) Top to bottom then from side to side. If you already have a door there and are just replacing it then you can just measure the door and get one of the same size. Good luck.
what is the size of an standard door between 27 to 30 by 70 32 or 36 inches wide by 80 inches tall. 24 and 30 inch wide are used for closet doors for the most part.
normally, 3.5 feet*7feet will be provided for residential house
In Australia The standard size of a front door is 2040mm X 820mm. In the US, the most common sizes are 32 x 81.5 or 36 x 81.5 (rounded up to 82).
My area, 2 3/8" is pretty standard.
There is no standard door width as they come in 2" increments up to 36" wide. A common door jamb width is 4-9/16" width, this is for a 2x4 wall and 1/2" drywall on both sides.
28
Well, your car's original tire size should be on the label that is located at the door frame. Just open your door and look where the hinge is. (not at the door but where the door meets the frame). I believe it should be P175-70-R14
It's the same size as a door. Standard size : 800 x 2,000 x 40mm
12/12
12 feet
look on the drivers side door. there should be a sticker on the door or door frame with the proper size tire and inflation in psi
There are lots of furniture stores which would be happy to sell you any size bed frame that you want.
It depends on the size of the paper and the size of the locker door. A standard letter-size piece of paper (8.5 x 11 inches) will likely fit on a standard size locker door, but larger papers may not fit.
The frame is measured by what size picture can fit in it. You can measure the exposed part of the glass to get an idea what size the frame is. Some standard sizes are 3x5, 5x7, 8x10, and 10x13.
A bathroom door is 2 foot door or a 2 foot 4 inch door.