0
What else can I help you with?
Is 1 x 1 wood really 1 inch by 1 inch?
No. The inch measure is described as "nominal". It is likely to be 25mm * 25mm
How much does a 12 inch X 12 inch 1 inch thick piece of steel weigh per foot?
TO answer this question, you need to know the density and the volume of the piece of steel. For example, "mild steel" weighs .284 pounds per cubic inch. The volume of a 12 inch x 12 inch x 1 inch piece of steel is 12 * 12 * 1 = 144 cubic inches. .284 pounds/inch^3 * 144 inch^3 = 40.896 pounds. So each of these steel tiles will weigh about 41 pounds.
What is weight of 12 inch dia x 12 inch round steel?
3.14159 x radius squared x thickness x .283 (weight of 1 cubic inch of steel)
What is the cubic inch when putting a 350 crank into a 400 block?
Standard bore would be 372.
What is the weight of W50 grade 1 steel?
what is the weight per cubic inch of W50 steel
What is DN 100 pipe?
Pipe with a Nominal Bore of 4 inch (100mm) Outside Diameter 114.3mm
What is the conversion factor to convert inches to NB?
The conversion factor to convert inches to "Nominal Bore" (NB) is 25.4 mm per inch. NB sizes are based on the internal diameter of a pipe, and they do not directly correlate to inches.
What is 50NB pipe?
NB = Nominal Bore. Bore is the internal diameter of the pipe. The 50 is referring to 50mm (5cm). So it boils down to a pipe with an internal diameter of 50mm.
What is the bore on a 283?
(3.875-inch bore, 3.00-inch stroke)
What is bore and stroke 351windsor?
4 inch bore, 3.5 inch stroke.
What is bore and stroke of a 289 windsor?
4 inch bore. 2.87 inch stroke.
Why is a 410 gun a caliber not a gauge?
The nominal bore of a .410 shotgun is.410 inch. Which is why it is properly called the .410 bore instead of the .410 gauge. In Europe it is sometimes called the 12mm, which is an inaccurate designation as a .410 bore has an actual diameter of approximately 10.4mm by metric measure. If the .410 had been named in the traditional fashion, by the number of lead balls .41 inch in diameter needed to make one pound, it would be about a 67-68 gauge.
What are shotgun gauge sizes related to in inches?
Shotgun gauges are determined by the number of lead balls of a given diameter required to make one pound of that size ball. Thus 10 balls of 10 gauge diameter are required to make one pound of such balls, or 20 balls of 20 gauge diameter are required to make one pound, and so forth. This is the traditional, and very old, system. The actual (nominal) bore diameters of the various gauges are as follows: 10 gauge = .775 inch, 12 gauge = .729 inch, 16 gauge = .662 inch, 20 gauge = .615 inch, 28 gauge = .550 inch. The .410 is named for its nominal bore size, and is not a gauge at all.
350 into a 355?
you have to bore out the cylinders .003 of an inch
Can a 410 bore 2 12 inch handgun buckshot shell be used in a 410 bore 2 12 and 3 inch shell shotgun?
Yes, for sure.
Is 1 x 1 wood really 1 inch by 1 inch?
No. The inch measure is described as "nominal". It is likely to be 25mm * 25mm
How many cubic feet in a 16 inch x 48 inch tube?
1.3962634 cubic feet Nominal
