That refers to the marks - for example, a ruler may be marked with centimeters and millimeters. The centimeter marks are somewhat longer (to distinguish them easily); the millimeter marks are usually the smallest division - the smallest unit that is marked on the scale.
To read a linear scale, start by identifying the smallest division marked on the scale, which represents the unit of measurement. Then, observe the position of the pointer or the object being measured relative to the scale. Count the full divisions from zero to the pointer, and add any additional fraction of the next division if applicable. This will give you the total measurement value.
Significant Figures
The size of the smallest scale division on an instrument, often referred to as the least count, varies depending on the specific instrument being used. For example, a standard ruler may have divisions as small as 1 millimeter, while a micrometer can measure to the nearest 0.01 millimeter. The precision of the instrument determines its smallest scale division, which is crucial for accurate measurements.
You can measure things with a linear scale. Practically impossible with a non-linear scale.
Linear is a straight line and non linear could be a curve or anything but a straight line
what is the value of the smallest division on a ammeter
what is the value of the smallest division on a ammeter
To read a linear scale, start by identifying the smallest division marked on the scale, which represents the unit of measurement. Then, observe the position of the pointer or the object being measured relative to the scale. Count the full divisions from zero to the pointer, and add any additional fraction of the next division if applicable. This will give you the total measurement value.
The smallest main scale division in a vernier scale with 50 divisions is 1/50th of the main scale division. This is because each division on the vernier scale corresponds to 1/50th of a main scale division, allowing for more precise measurements to be made.
Epoch
The smallest division on the main scale of a micrometer gauge typically corresponds to 0.5 mm or 0.025 inches. This is the precision at which the main scale can be read.
Significant Figures
The smallest division on the main scale of a vernier caliper typically corresponds to 1 millimeter. The vernier scale allows for more precise measurements by measuring to the nearest 0.1 millimeter.
The smallest division on the main scale of the vernier calipers is typically 1 millimeter, while the smallest division on the screw gauge is typically 0.01 millimeters, also known as 0.01 mm.
The least count of a physical balance is the smallest measurement that can be read or displayed on the balance scale. It is determined by the precision of the scale and the smallest division marked on the scale or indicated by the scale's display.
The size of the smallest scale division on an instrument, often referred to as the least count, varies depending on the specific instrument being used. For example, a standard ruler may have divisions as small as 1 millimeter, while a micrometer can measure to the nearest 0.01 millimeter. The precision of the instrument determines its smallest scale division, which is crucial for accurate measurements.
A non-linear temperature scale means that the intervals between temperature readings are not consistent across the scale. This can result in the temperature difference between two points not being proportional to the numerical value assigned to those points on the scale. An example of a non-linear temperature scale is the Fahrenheit scale, where the degree intervals are not uniform.