5 meters
Geometric length in magnets refers to the physical dimensions of the magnet, such as its length, width, and thickness. This measurement is important in determining the overall size and shape of the magnet, which can impact its magnetic properties and behavior.
using a tape measure is the best way and the preferred method according th o the US Navy.
i measured mine from the end of the muzzle to the end of the buttplate I came up with 38&5/16 inches
Rebar is measured by length (so inches or mm) and is usually followed with by weight. There are various sizes (diameters) of bars. Each size has a weight per length than you determined weight by length X barsize weight per length. It can be done in metric or imperial, just have the appropriate and corresponding chart that is relevant. For projects, the total rebar weight of the job is usually what is used to tell overall scope of project size.
And does the Overall Length as listed in the Ford specs include the tailgate when it is down?
As bolts come in various lengths, an overall length is impossible to say.
It usually is 43.5 inches for the overall length.
182.1 inches is the overall length.
What is the overall height, width and length of a 1991 Chevy 1500?
Depending on the weapon, it can be both.
Depends on what tractor you put in front but it will be around 75 feet overall length.
SHALL NOT EXCEED 680mm IN OVERALL LENGTH AND 230mm IN OVERALL WIDTH
18
There is no restriction on barrel length but the overall length of the firearm must be 26.5 in or greater
The overall length of a 1985 Chevy Blazer is 4,712 mm or 185.5 inches. Its curb weight is around 2075 kg.
The Nissan Juke has an overall length of 162.4 inches (about 13.53 feet).