0.000000000014
It could way less, it could way more, or it could way the same. Depends on the pressure. If the pressure is the same in both cubic meters, then the hydrogen ways less than the oxygen.
Gas is compressible. As long as you can keep increasing the pressure, you can stuff as much oxygen into a bottle or a tank as you want to, until it bursts.
Kilogram per cubic meter is the one that doesn't belong. Square meter is meter^2 and cubic meter is meter^3 but kilogram per cubic meter is a density
That doesn't make sense. Square meter is 2D. Cubic meter is 3D. To attempt to answer your question... A square meter is one meter long and one meter wide. A cubic meter is one meter long, one meter wide, and one meter tall.
An oxygen meter measures the concentration of oxygen in a particular environment, usually expressed as a percentage of oxygen in the air. It is commonly used in medical settings to monitor oxygen levels in blood (pulse oximeter) or in industrial settings to ensure safe oxygen levels for workers.
An oxygen meter measures the amount of oxygen from the pulse in a finger by being placed on an individuals fingertip which causes two wavelengths to be able to pass through the individual to a photo detector.
An oxygen meter, also known as a pulse oximeter, works by using light to measure the oxygen saturation of your blood. It emits light through your fingertip and detects how much is absorbed, which changes based on the level of oxygen in your blood. The device then calculates your oxygen saturation level and displays it on the screen.
As the density of Oxygen at 0º C is 1.429 kg/m³ i.e. cubic meters * density = kilograms so, 1 cubic meter of oxygen would weigh 1.429 kilograms.
A reading on an oxygen flow meter is typically taken from the flow meter itself where the indicator or marker aligns with a specific number indicating the flow rate of oxygen in liters per minute. It is important to read the measurement at eye level to ensure accurate readings.
Oxygen concentration in water can be tested using a dissolved oxygen meter or a chemical test kit. The dissolved oxygen meter measures the amount of oxygen dissolved in the water, while a chemical test kit uses reagents to indicate the oxygen level based on a color change. Both methods provide an accurate assessment of oxygen concentration in water.
A dissolved oxygen meter measures the oxygen pressure in water. An anode is covered with water to halt the oxygen probe in the DO to give a reading.
liters per minute
A dissolved oxygen meter is commonly used to measure dead zones, which are areas with low or depleted oxygen levels. The meter determines the amount of oxygen present in the water, providing insights into the extent of the dead zone.
The atomic radius of oxygen is approximately 60 picometers (pm) or 0.00000000006 meters.
0.000000000014
To convert 1 cubic meter of liquid oxygen to kilograms, you need to know the density of liquid oxygen. The density of liquid oxygen at its boiling point is approximately 1.141 kilograms per liter. Since 1 cubic meter is equal to 1000 liters, you can calculate the conversion by multiplying the density by the volume: 1.141 kg/L x 1000 L = 1141 kg. Therefore, 1 cubic meter of liquid oxygen is equivalent to 1141 kilograms.