Move the decimal point to times to the right. Example: .30 = 30% 23 = 2300% .214 = 21.4%
It depends on their orientation - back to front (in contact), back to front with a 30 cm gap, or head to toe. * If the line were 1 cm units the line would be 1,100,000 km long. * The in contact line would then be (at 30 cm/person) 33,000,000 km long * The 30 cm gap line 66,000,000 km * The head to to toe line (80 cm/unit) 88,000,000 km
boiling point.
There's 30 teams in the NHL , NBA, MLB. 30 is would be the second point it tennis. I'll make more facts...... just wait
To convert 30% to decimal: 1. Remove the % sign. 2. Divide 30 by 100 or simply move the decimal point two places to the left. therefore 30% = 0.30 in decimal
set the point gap to achieve 30 degrees dwell.
The point gap should be set for 30 degrees dwell.
.016 inch , 30 degrees point dwell
30 degrees dwell
The point gap would probably be about .016-.018". The actual specification is 30 degrees dwell, which must be checked with a dwell meter. Spark plug gap is .030"
30 degrees dwell
.022 point gap(between .018and .024)dwell is 30(between 28 and 32)
what is point setting for chev 350 v8 engine Use dwell meter to set the gap to 30 degrees dwell.
30 degrees dwell
The gap is usually about .016", but it should be set at 30 degrees with a dwell meter for optimum accuracy.
1977 305 doesn't have points unless the distributor has been replaced with an older design. Point gap on any V8 Chevrolet is 30 degrees dwell.
30 degrees dwell