The smallest accurate measurement that can typically be made on an engineer's rule, which is marked in millimeters, is usually 1 millimeter. However, depending on the precision of the markings and the user’s ability to read them, measurements can sometimes be estimated to half a millimeter (0.5 mm). In some cases, engineers may use finer divisions, such as tenths of a millimeter, for more precise work, but this depends on the specific design of the rule.
The smallest accurate measurement that can be made with a 25-50 mm micrometer is typically 0.01 mm (10 micrometers). This precision is achieved through the micrometer's finely calibrated scale, allowing for accurate readings within that range. Depending on the specific design of the micrometer, some models may offer even finer measurements, but 0.01 mm is standard for most micrometers in that size range.
The smallest measurement that can typically be made on an engineer's rule, which is a type of scale used for measuring lengths, is usually 1/16 of an inch or 1 millimeter, depending on the rule's design. Some precision rules may even allow measurements down to 1/32 of an inch or finer metric divisions. The exact smallest measurement can vary based on the scale's markings and the user's ability to read them accurately.
James Gimzewski at the IBM laboratory in Zurich, Switzerland made the world's smallest calculator.
The smallest possible number that can be made using the digits 5, 2, 1, and 9 is 1259. By arranging the digits in ascending order, the smallest combination is achieved. The digit '0' is not available, so the next smallest arrangement begins with '1'.
When you are given some numbers just arrange them in ascending order and you will the smallest number which can be made out of those given numbers.
0.01mm
25mm
10000000000000000000
Never: A measurement made is always an approximation. We can get very close to being accurate with our measurements, but never fully 100% accurate. This is not the fault of the person measuring, or what tool they are using to measure with, but it is a natural law that we (anyone, even superior aliens to humans) cannot ever fully make an absolutely accurate measurement.
measurment
The smallest accurate measurement that can be made on a standard metric 25 50 mm micrometer is typically 0.01 mm or 0.001 cm. These micrometers are designed to read to the hundredth of a millimeter or the thousandth of a centimeter, providing relatively precise measurements.
The smallest accurate measurement that can be made on a standard metric micrometer, typically between 25-50 mm, is usually 0.01 mm (10 micrometers). This is achieved through the use of a thimble that is graduated in increments of 0.01 mm. The micrometer's design allows for precise adjustments, enabling accurate readings to this level of detail.
The smallest accurate measurement that can be made with a 25-50 mm micrometer is typically 0.01 mm (10 micrometers). This precision is achieved through the micrometer's finely calibrated scale, allowing for accurate readings within that range. Depending on the specific design of the micrometer, some models may offer even finer measurements, but 0.01 mm is standard for most micrometers in that size range.
25mm
The smallest measurement that can typically be made on an engineer's rule, which is a type of scale used for measuring lengths, is usually 1/16 of an inch or 1 millimeter, depending on the rule's design. Some precision rules may even allow measurements down to 1/32 of an inch or finer metric divisions. The exact smallest measurement can vary based on the scale's markings and the user's ability to read them accurately.
The smallest is one cell.
It was made by engineers.