An acre is a measurement of area.
Equal to 4,046.8564224 square metres. Any combination of two numbers that give this product in metres would be an acre. In feet, it is equal to 43560 square square feet.
Measure the depth and width using the same units. Divide the depth measurement by the width measurement.
The depth is neither the length nor width. Length is the measurement from top to bottom, width is from side to side, and depth is from front to back.
An acre's breadth is a historical term for a chain - the width of a single acre, which is defined as 10 square chains.
acre is area length x width so it depends on the length as to how wide it is
There are 43,560 ft2 in an Acre.43560-2 = 208.71 Or ...An Acre is a square, 208.7 ft on a side.
Measure the depth and width using the same units. Divide the depth measurement by the width measurement.
width, depth and height
The depth is neither the length nor width. Length is the measurement from top to bottom, width is from side to side, and depth is from front to back.
An acre's breadth is a historical term for a chain - the width of a single acre, which is defined as 10 square chains.
There are 43,560 square feet in an acre of land. To determine the volume of dirt in an acre, you would also need to know the depth of the dirt. If you assume a depth of 1 foot, then there would be 43,560 cubic feet of dirt in an acre.
To find the depth of a rectangle given the length, width, and volume, you first need to determine the formula for the volume of a rectangular prism, which is length x width x depth. Then, you can rearrange the formula to solve for the depth by dividing the volume by the product of the length and width. This will give you the depth of the rectangle.
acre is area length x width so it depends on the length as to how wide it is
have .27 acre with 200 ft width what is length
An acre is a unit for area. Width x length. You can obtain the 2.54 acre area with a lot of length and width combinations. If you don't know the length, you cannot determine with any certainty what the width will be.
height * width * depth = volume height = volume / (depth * width) Volume = lengthXwidthXheight V=LWH H=V/LW
There are 43,560 ft2 in an Acre.43560-2 = 208.71 Or ...An Acre is a square, 208.7 ft on a side.
A point.