Wiki User
∙ 8y agoWant this question answered?
Be notified when an answer is posted
Linear distance of one revolution = 3.14 x diameter = 3.14 x 20 = 62.8 meters
A meter is a unit of measure, and a diameter is the longest linear distance from one point on a circle to another. You cannot convert from one unit to another. If you know other information about a particular circle, however, you can find the diameter's length in meters, but this value can change depending on the circle.
It will be the circumference which is pi*14 meters
Square metres are a unit of area. Linear metres are a unit of distance. The two units are therefore incompatible.
A linear metre is a unit of distance. A square metre is a unit of area. The two units are therefore incompatible.
The distance would be approximately 1.15 kilometers. This can be calculated using the formula: distance (in meters) = linear size (in meters) / tan(angular size in radians). The angular size of 100 seconds of arc is approximately 0.00048 radians (100/206265), and the tan of this angle is roughly 0.00048. Dividing 30 meters by 0.00048 gives us 62500 meters, which is 1.15 kilometers.
Linear distance of one revolution = 3.14 x diameter = 3.14 x 20 = 62.8 meters
The angular diameter of the full moon is about 0.5 degrees. To calculate the distance at which a dime would have the same angular diameter, you can use the formula: tan(angular size) = (diameter of object) / (distance). Plug in the values and solve for distance to find that you would need to hold the dime approximately 68 meters away from your eye.
Angular diameter refers to the apparent size of an object in the sky, measured in degrees, arcminutes, or arcseconds. Linear diameter, on the other hand, is the actual physical size of an object, typically measured in units such as meters or kilometers. Angular diameter depends on the object's distance from the observer, while linear diameter is a fixed measurement.
Square meters measure area but linear meters measure distance.
Invalid conversion: square meters is a measure of area and linear meters is a measure of length or distance.
Invalid conversion: square meters is a measure of area and linear meters is a measure of length or distance.
Invalid conversion: square meters is a measure of area and linear meters is a measure of length or distance.
Invalid conversion: square meters is a measure of area and linear meters is a measure of length or distance.
That is analogous to linear speed and velocity, but for rotation. Whereas a linear speed (or velocity) is expressed in meters per second (or some other units of distance / time), the angular speed or velocity is expressed in radians / second (or some other units of angle / time). Of course, when something rotates, there is also a linear speed, but different parts of an object rotate at different linear speeds, whereas the angular speed is the same for all parts of a rotating object - at least, in the case of a solid object. For example: the Earth rotates at an angular speed of 1 full rotation / day. The linear speed at the equator is approximately 1667 km/hour; close to the poles, the linear speed is much less.
A meter is a unit of measure, and a diameter is the longest linear distance from one point on a circle to another. You cannot convert from one unit to another. If you know other information about a particular circle, however, you can find the diameter's length in meters, but this value can change depending on the circle.
350 linear meters is equivalent to 350 meters. The term "linear meters" is typically used to describe length or distance in a straight line, so in this case, the distance is the same as regular meters.