Brass is any alloy of copper and zinc. the proportions of zinc and copper can be varied to create a range of brasses with varying properties
30% zinc and 1% tin,60.66% copper, and 1.74% iron
Wiki User
∙ 11y ago32%
Depending on context the plural form of brass can be brass or brasses.
which brass in sq mtr measurement
There is only 1 syllable in the word 'brass'.
1 Brass = 4 tonne = 4*1000 kg. = 4000 kg ....is it right or not
Using brass shavings increases the surface area available for chemical reactions, leading to more accurate results in determining the composition of brass. This increased surface area allows for better mixing with reagents, promoting a more thorough reaction. Additionally, shavings are easier to handle and disperse evenly, ensuring that the sample is representative of the overall composition of the brass.
32%
Brass is a good conductor of electricity compared to materials like rubber or plastic, but it is not as conductive as pure metals like copper or silver. Its conductivity depends on the composition of the brass alloy and can vary based on the percentage of copper and zinc in the mixture.
It is a special solution; see the link below for the composition.
Brass is not a compound, because its atomic composition can vary from one sample to another. Instead brass is a mixture, of the special type called an alloy, because it is a mixture primarily of metals.
Yes, brass is considered a heterogeneous mixture. It is composed of two or more substances (copper and zinc) that are physically combined but can be separated through mechanical means. This means that brass does not have a uniform composition throughout its structure.
the percentage composition of aluminum sulfate is 342
the percentage by mass of each element in a compound.
The percentage of oxygen (in mass) is 29,776 %.
Brass is a homogeneous mixture because it is a solid solution of copper and zinc. Both elements are uniformly distributed at a microscopic level within the brass, resulting in a consistent composition throughout the material.
The percentage composition of H3PO4 (phosphoric acid) is: Hydrogen (H): 0.85% Phosphorus (P): 30.69% Oxygen (O): 68.46%
Brass is a homogeneous mixture. It is made up of a combination of copper and zinc, which are two elements. As a homogeneous mixture, brass has a uniform composition and properties throughout.