The conversion of liters to tons for water is straightforward because 1 liter of water has a mass of approximately 1 kilogram. Since 1 ton is equal to 1,000 kilograms, this means that 1 ton of water is equivalent to 1,000 liters. Therefore, to convert liters of water to tons, divide the number of liters by 1,000.
None. Water contains no fibres and so no amount of water can make paper.
To convert liters to tons, you need to know the density of the substance in question. For water, which has a density of approximately 1,000 kg per cubic meter (or 1 ton per 1,000 liters), 4,000,000 liters would equal about 4,000 tons. For other substances, the conversion would vary based on their specific densities.
gallons x 3.785 = liters
The number of liters in 1 ton of diesel fuel depends on its density, which typically ranges from about 0.81 to 0.85 kg/L. Assuming an average density of 0.84 kg/L, 1 ton (1,000 kg) of diesel would be approximately 1,190 liters. Thus, there are roughly 1,190 liters in 1 ton of diesel.
Mathematically, no. The cm to L conversion is simply divide by 10000 so 60000cm³ = 60L
It depends on the substance. For water, one metric ton (tonne) is equal to 1000 liters. However, for other materials like oil or chemicals, the conversion will be different based on the density of the substance.
Conversion: Naptha is 0.75 g / cc or 1.333 cc/g Conversion: 1000 cc = 1 l Conversion: 453.59237 g = 1 pound. Conversion: 2000 pounds = 1 ton 1 ton * 2000 lb/ton * 453.59237 g/lb * 1.333 cc/g * 0.001 l/cc = 1209.579653 liters.
One metric ton of water is equivalent to 1000 liters.
1 metric ton is 1000 kilograms.1 liter OF WATER is 1 kilogram.so 1 metric ton is 1000 liters (of water).
To convert a ton of refrigeration to liters, you need to know the density of the refrigerant being used in the refrigerator. Without this information, a direct conversion from tons to liters is not possible.
A liter is a measurement of volume. A ton is a measurement of weight. You cannot convert directly between the 2.
1000 litres, approx.
One thousand.
452 mL of water is equal to 0.452 liters. This conversion is done by dividing the volume in milliliters by 1000 to get the equivalent volume in liters.
Approximately 1270 liters of glycerin are in 1 ton.
There are 1,000 litres of cold water (4 degrees Celsius) in a metric tonne. Each litre, weighs one kilogram. There are 1,000 kilograms in a metric tonne. +++ Be careful. That answer is correct only for water. You cannot mix units of volume with those of mass.
The conversion of weight (pounds) to volume (liters) depends on the density of the substance. For water, 10 pounds is roughly 4.54 liters. However, for other substances, the conversion will vary.