Wiki User
∙ 13y agoThis line is called the meniscus.
Wiki User
∙ 13y agoit is probably called figure it out, it is curved because glass is sticky. When you measure the volume from a graduated cylinder, measure at the bottom of it. It is called the meniscus.
To determine the volume of an irregular object using graduated cylinders, you fill a graduated cylinder with water right to the top, then submerge the object in the water. Measure the water that overflows using a second graduated cylinder, and read the water level in it in cc's or cubic inches. That is the object's volume.
The meniscus.
Put it in a graduated cylinder. a) Find a graduated cylinder big enough to hold a can of Coke. b) Make sure it has a small scale. (Smaller scales are more accurate.) c) Fill the graduated cylinder with water to a mark on the cylinder. d) Find how much higher the water is when you drop the can in.
As many as were put into it, subject to the total capacity of the cylinder.
it is probably called figure it out, it is curved because glass is sticky. When you measure the volume from a graduated cylinder, measure at the bottom of it. It is called the meniscus.
5 Have no dam answer
This is called meniscus.
I think you are talking about a graduated cylinder. When measuring liquids in a grad. cylinder you should read at the bottom of the miniscus ( the curved surface of the water or other liquid).
To read the volume of water in a graduated cylinder, make sure your eye is level with the meniscus (the curved surface of the water). Read the volume at the bottom of the meniscus to get an accurate measurement. Ensure the graduated cylinder is on a flat surface to prevent parallax errors.
Use the water displacement method. You need a graduated cylinder and some water. Fill the graduated cylinder with enough water so that when you place the rock in the graduated cylinder it will cover the rock. Read the meniscus (the slightly curved line of the water) at eye level. Record your measurement of the water in the graduated cylinder (in mL). Place the rock in the graduated cylinder and record your new measurement of the water line, again at eye level. Subtract the original measurement from the new one to get the volume of the rock.
Water in a graduated cylinder forms a meniscus due to the capillary action, which is the result of the water molecules being attracted to the walls of the cylinder. This causes the water's surface to curve slightly upward or downward at the edges, creating the meniscus shape.
A concave meniscus forms in a graduated cylinder with water due to adhesive forces between the water molecules and the walls of the cylinder. This causes the water to cling to the walls, resulting in a concave shape.
To measure 20 milliliters using a graduated cylinder, pour liquid into the cylinder until the meniscus (the curved surface) lines up with the 20 ml mark on the graduated scale. Make sure to read the measurement at eye level for accuracy.
Graduated Cylinder - Marbles
A graduated cylinder is used to measure the volume, or capacity of water. Or to just measure Water.
You can put water in the graduated cylinder and drop the solid in and see how much the water rises