answersLogoWhite

0

What else can I help you with?

Continue Learning about Math & Arithmetic

What is the diameter of 500mm wire?

The diameter of a 500mm wire is 500 millimeters. This measurement indicates the thickness of the wire, which is equivalent to 0.5 meters. Thus, it represents a relatively large diameter, commonly used in applications requiring substantial strength and conductivity.


What is used to measure the diameter of wire?

The diameter of wire is commonly measured using a tool called a micrometer or a caliper. A micrometer provides precise measurements by using a screw mechanism to gauge the thickness of the wire. Calipers, which can be either digital or manual, allow for quick measurements and can handle a range of wire sizes. Additionally, wire gauges are also used to determine the diameter based on standardized wire sizes.


Which one of the following wire gages has a diameter of 204.3 mils a?

The wire gauge that corresponds to a diameter of 204.3 mils is 4 AWG (American Wire Gauge). In mils, 1 AWG is approximately 0.46 inches or 460 mils, and as the gauge number increases, the diameter decreases. Therefore, 4 AWG, with a diameter of about 204.3 mils, fits this specification.


What is AWG18 in inches?

AWG18 wire has a diameter of 0.0403 inches.


What is the diameter of paper clip wire?

The diameter of paper clip wire typically ranges from about 0.8 mm to 1.2 mm (approximately 18 to 16 gauge). However, the exact size can vary depending on the manufacturer and the specific type of paper clip. Most commonly, standard paper clips are made from wire that is around 0.9 mm in diameter.

Related Questions

If the wire is increased what should happen to the diameter?

If the wire is increased in length, the diameter of the wire should remain the same unless explicitly changed. The diameter of a wire is determined by its cross-sectional area, which is independent of its length.


Can PVC bell wire be operated at 230v?

No bell wire is not meant to be 230V.


What is the diameter of 16 gauge wire?

16-gauge wire has a diameter of 0.05082 inches.


Does a wire with a diameter of 0.01 mm have lower resistance than a wire with 0.1 mm?

No, the wire with a diameter of 0.01 mm will have higher resistance compared to a wire with a diameter of 0.1 mm. Resistance of a wire is inversely proportional to its cross-sectional area, so a thinner wire will have higher resistance.


How are resistance and the diameter of a wire related?

Resistance is inversely related to the diameter of a wire. A larger diameter wire will have less resistance compared to a smaller diameter wire, assuming other factors like length and material remain constant. This is because a larger diameter wire provides more space for electrons to flow through, resulting in less resistance to the flow of current.


Which wire would have the least resitance a large diameter or small diameter wire and why?

large diameter wire simply because it will move easier Technically they would have the same resistance, but the larger diameter wire would allow more current to flow as it would have more room to move.


If the wire dia is 4mm then what is the gauge?

A wire with a diameter of 4mm corresponds to a wire gauge of approximately 6 AWG (American Wire Gauge). The relationship between wire diameter and gauge is not linear, so different wire diameters can correspond to the same gauge.


What is the cable diameter of a twin copper wire?

There isn't a specific diameter. The thicker the wire the more current it can convey. This diameter will be part of your calculations for your circuit.


What is the diameter of 18 awg wire?

The diameter of an 18 AWG wire is approximately 1.02 millimeters or 0.0403 inches.


Which awg wire gauge indicates the smallest wire diameter?

The larger the wire gauge, the smaller the diameter. 12 gauge is bigger than 14 gauge.


What is the approximate gauge of a wire that has a diameter of about 100 mils?

A wire with a diameter of about 100 mils (0.1 inches) is approximately 10 American Wire Gauge (AWG). In the AWG system, as the gauge number decreases, the diameter of the wire increases. Therefore, a diameter of 100 mils corresponds closely to 10 AWG.


How is the diameter of a wire measured?

gauge