0
What else can I help you with?
How do you program a PL into a yaesu ft 60?
To program a PL (Privacy Tone or CTCSS tone) into a Yaesu FT-60, first, turn on the radio and switch to the desired frequency or memory channel. Press the "F" key, followed by the "T" key to access the tone settings. Use the tuning knob to select the desired PL tone frequency, and then confirm your selection by pressing the "F" key again. Finally, ensure the "T" indicator is displayed on the screen to confirm that the tone is activated for that channel.
What is the actual difference between 7.0 cu ft and 7.5 cu ft capacity in clothes dryer?
6"by 6"by" 6"= .5 Cu Ft
Is there a big difference between 2561 sq ft and 2200 sq ft?
There is if you are putting down very expensive tile or carpeting.
What is the difference in height on a 75 foot long pipe sloped at one degree?
Presuming you mean difference in height between the two ends: height = 75 ft × sin(1°) ≈ 1.31 ft ≈ 1 ft 3.7 in
What is the difference between running foot and square foot?
Running Foot (ft) is a measure of distance. Square Foot (ft²) is a measure of area.
How many memories are contained in the yaesu ft-2000 voice memory system?
16? Nope, the correct answer is 4
Can Yaesu FT-60 be damage by turning it on and off?
I have owned several 60's and have done a lot of turning on and of with no problems whatsoever.... Roger
How do you program a PL into a yaesu ft 60?
To program a PL (Privacy Tone or CTCSS tone) into a Yaesu FT-60, first, turn on the radio and switch to the desired frequency or memory channel. Press the "F" key, followed by the "T" key to access the tone settings. Use the tuning knob to select the desired PL tone frequency, and then confirm your selection by pressing the "F" key again. Finally, ensure the "T" indicator is displayed on the screen to confirm that the tone is activated for that channel.
How do you program a frequency directly into the memory of a Yaesu FT-60 and still hear the audio when you have tried but there is no audio?
You may have the right frequency, but there a couple or three encoding schemes for encoding the squelch control on the radio's receive section. You won't be able to hear any audio until you match the encoding used in the transmitting radio. It's another way of adding some channel privacy to those who have general purpose receivers, and it also helps to keep the airwaves from being cluttered by a lot of radio transmissions, allowing the transmitter/receiver to become selective in what they'll receive. You'll find info in the Yaesu owner's manual on how to set those frequencies and even have the radio do an automatic search to find them. If you don't have a manual, you should be able top go to the Yaesu website and download a copy.
Why yaesu ft-250 can't communicate to Motorola ep450?
The Yaesu FT-250 is a 100-watt transceiver that operates on the amateur radio frequency bands between 3.5 MHz and 29.5 MHz. The Motorola EP450 is a hand-held 5-watt transceiver that operates in the VHF ranges of 136-162 MHz and 146-174MHz, and in the UHF ranges of 403-440 MHz, 438-470 MHz, and 465-495 MHz. As you can see, the two units don't share any frequencies of operation. They can't communicate with each other for much the same reason that you can't receive local AM stations on your FM radio. (There are other reasons, but frequency incompatibility is the biggie that's most appropriate to this discussion.)
What is difference in capacity of 3.4 cu ft washer vs 3.6 cu ft?
Yes
What is difference between IR and FT IR?
nothing
What is the difference between NAIR and FT-IR instruments?
nothing
What is the actual difference between 7.0 cu ft and 7.5 cu ft capacity in clothes dryer?
6"by 6"by" 6"= .5 Cu Ft
What is the difference between an NHL standard net and an International size net?
there is no difference in net sizes for any ice hockey game they are all 4 ft high and 6 ft long
Is there a big difference between 2561 sq ft and 2200 sq ft?
There is if you are putting down very expensive tile or carpeting.
What is the difference in height on a 75 foot long pipe sloped at one degree?
Presuming you mean difference in height between the two ends: height = 75 ft × sin(1°) ≈ 1.31 ft ≈ 1 ft 3.7 in
