I'm having serious difficulty answering that one, and I won't be able to
come up with a response, primarily because you've told me technically
nothing about Network-B, and haven't arranged for me to actually see
any diagram of it.
3R
Network theorem refers to a set of principles and mathematical techniques used to analyze electrical circuits and networks. Key theorems include Thevenin's and Norton's theorems, which simplify complex circuits into equivalent circuits with voltage or current sources and resistances. These theorems facilitate easier calculations of circuit behavior, making it possible to determine voltage, current, and power distributions within a network. Overall, network theorems are essential tools for engineers and technicians in the design and analysis of electrical systems.
the network which consist linear elements is known as linear network
internal Network
you cannot create a network with only one odd vertice because then the network would end straight away and that the network would not be complete
3R
In short, yes, it is possible, but much, much more difficult. Laplace transforms turn systems of integro-differential equations into algebraic equations, and give an immediate expression for the frequency response which is very heavily used in design.
A resistance 'network' consists of a number of resistors connected together in series, or in parallel, or in series-parallel, or as a complex circuit. A 'complex' circuit is one that is not series, parallel, or series-parallel.
first you need to touch yourself
Rtotal = 1 / ( (1/RA) + (1/RB) )
it is used to remove all the earth resistance from the bridge network.
Yes it is a PS3 game with offline and online cooperative modes
The Global Network Initiative mission states "protecting and advancing freedom of expression and privacy in information and communications technologies. The Initiative provides information and support to the ICT industries and their stakeholders on how to protect the freedom of privacy and expression when pressured to infringe upon these rights.
Ohm is the SI unit of electrical impedance (AC) or the electrical resistance (DC), named after Georg Ohm. Not Ohms!
Norton’s Theorem states that any linear electrical network with voltage and current sources and resistances can be simplified to a single current source in parallel with a single resistor. To apply Norton’s Theorem, first, identify the portion of the circuit you want to analyze and remove the load resistor. Then, calculate the Norton equivalent current (I_N) by finding the short-circuit current across the terminals and the Norton equivalent resistance (R_N) by turning off all independent sources and calculating the equivalent resistance seen from the terminals. Finally, replace the original circuit with the Norton equivalent circuit for analysis.
superposition therorem states that in linear network containning more than one source of emf the resultant current in any branch is the algebraic sum of the current that would have been produced by each source of emf .taken sepertely with all other sources of emf replace by their internal resistance ........... that is called superposition theorem ..
Douglas R. Shier has written: 'Network reliability and algebraic structures' -- subject(s): Abstract Algebra, Computer networks, Reliability