1.5 x 25.4 = 16.8 x size of spool - the length to the plan
------------------------------------------------------------------------------
new answer
A is baseline of a triangle
B is the Vertical Line of a triangle
C is the diagonal line or Hypotenuse
C is what you want
using a 45 degree
A x 1.4142 = C
B x 1,4142 = C
A^2 x B^2 = C^2
the fitting takeout to find cut length of pipe is
TAN(1/2 degree of turn) x radius if the fitting
or
Tan(22.5) x Fitting Radius
Fitting Radius has 3 options
Short Radius = 1x pipe size
Long Radius = 1.5 x pipe size
3 Radius = 3 x Pipe size
whatever the offset is times it by 1.414 and this will give you your travel then just take off the centres of the 45's and you have your cut length....for instance if the offset is 12 inchs you multiply it by 1.414 you come up with 16.968..meaning 1 foot 4 inchs 15/16 just thought alittle clarity might help if the person was new in trade.
If there are 2 circles of same size , offset by distance x what is the area of the overlap
1.414. x offset- Straight of 45's
There is no exact formula to lay out pipe miters, but there is information that must be known to calculate the layout. This includes the diameter, wall thickness, angle, and offset.
offset
the terms are part of the offset dimensions: set=perpeendicular distance run=linear distance Travel=Hypotenuse of the 2 dimensions (or true length) for further info on this and other pipefitting resource : www.pipefitter.co.uk
whatever the offset is times it by 1.414 and this will give you your travel then just take off the centres of the 45's and you have your cut length....for instance if the offset is 12 inchs you multiply it by 1.414 you come up with 16.968..meaning 1 foot 4 inchs 15/16 just thought alittle clarity might help if the person was new in trade.
it is a45
375 km taking this route:Take A1 ONASBRÜCK, from Bremen, to A45 GIEßEN at WESTHOFNER KREUZ (Westhofner Cross), near Dortmund.Take A45 to Wetzlar.
1.4142 will give the travel piece center to center
In WWI,WWII and the Korean war. ~A45
A45 and A92 motorways - about 85 miles
Raise Face Slip-On
26 miles taking this route:Take A509 WELLINGBOROUGH, from Milton Keynes, to A45 towards PETERBOROUGH and CAMBRIDGE, at the junction outside of Wellingborough. Follow signs to A45 PETERBOROUGH and CAMBRIDGE.Take A45 to RAUNDS.
Check out the "Rolling Offset" page at (see below). I'm not sure but do a trial run on a couple of cereal boxes and see if this gives you the information you need. The is a "Note" page that shows some ways of a rolling offset calculation.
If there are 2 circles of same size , offset by distance x what is the area of the overlap
1.414. x offset- Straight of 45's