The graph of a continuous function will not have any 'breaks' or 'gaps' in it. You can draw it without lifting your pencil or pen. The graph of a discrete function will just be a set of lines.
For a graph to be a function, each x-value has to take maximum one y-value. One way you can check this is drawing a vertical lines through points on the graph. If a single vertical line intersects the graph in more than one place, that means the x-value defining the line has more than one y-value, and the graph is not a function.tl;dr: Draw vertical lines through the function, and if the lines only intersect the graph once, you have a function.
When graphed, a function has any shape so that all vertical lines will cross the graph in at most one point. A relation does not have this condition. One or more vertical lines may (not must) pass thru a relation in more points.
y=o, x=-3,x=0 and x=2
|y| If this is what you meant, it is the top function of the key with the back slash, which is directly to the right of the key with the brackets.
A hydraulic function is a function that employs water or other liquid for something to operation. There are many types of hydraulic motors or machinery used for engineering purposes. The heart would be a good example of a natural hydraulic function.
Pressure by the hydraulic pump is made​​.
That function is handled by the antilock brake hydraulic unit.That function is handled by the antilock brake hydraulic unit.
The ___________ press performs the same function as a hydraulic press, but at lower pressures.
To lift things.
The manifold block directs the hydraulic fluid into or out of the cylinder.
its is a oil; storage component
Air in the lines
galvanised pipe
galvanised pipe
Good Question . Next please.....
Hydraulic is used in terms to define liquid. Hydraulic mining in the ole days was used by high pressure water. Hydraulic lines contain oil for cranes, booms, etc.