Best Answer

capacity of rectangular bar = l X b X h .

here,capacity = 0.5 X 6 X 0.5 .

=1.5 inches ^ 3

Q: What is the load capacity of a steel bar 0.5 inches x 6 inches x 0.5 inches?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

how many steel bar in one ton

Thermo Mechanically Treated (TMT) bars have revolutionised the industry with its superior quality as against the cold twisting process to manufacture the traditional reinforcement bars. The special heat treatment process ensures greater strength, excellent ductility, enhanced bendability and much superior weldability. CHEMICAL PROPERTIES : Grade C%Max* S%Max P%Max Mn%Min Si%Max Fe-415 0.30 .055 .055 .55 .35 The most commonly used steel bar for concrete reinforcement is TOR steel. The other names of TOR steel are CTD bar, deformed steel bar, twisted steel bar, HSD bar, CWD bar etc. These TOR steel bars can be used for general concrete reinforcement in buildings, roads, bridges etc. These steel bars process a combination of strength and ductility that is far in excess of minimum limits specified in standard IS:1786. ::TOR steel bars are certified to IS:1786 in dimensional tolerances. However in the size range of 8/12 mm where tolerance are of great concern, much closer tolerance that the specification is maintained. HYSD High Yield Strength Deformed (steel) .It is reinfrocement steel.

If its general purpose mild steel square bar then its 2.01 kg/m. So 12.06kgs all together.

A 1.55-ounce Hershey bar is about 5 and 3/8 inches long, 2 and 1/8 inches wide and a quarter of an inch thick. Metric measurements for the 43-gram bar are approximately 13.6 centimeters long, 5.5 centimeters wide and 0.5 centimeters high.

draw a bar 3 in long in outline form, then shade the first 2 inches.

Related questions

4000 lbs with load stabilizer bar.

Weight per metre length= 0.559 kg

Fe 500D enables to withstand the sudden load absorption capacity,which is encountered during earthquakes,cyclones and tsunamiesetc events and provides higher safety to the structure. This shall be mainly used in high seismic zones.

500W in steel bar means this steel yields 500MPa strength

500W in steel bar means this steel yields 500MPa strength

Assuming that the bar is made of steel & of circular cross-section & loaded in simple tension, Stress= Load applied/area of the bar. In SI units, area = Pi x (diameter)2/4 "square metre" Apply the load in "Newtons". then calculate the stress developed in N/m2

Extreme Steel bar is known as re-bar ( Reinforcing Bar), with two longitudinal and transverse ribs on the diameter of Bar.

steel bar

It is a deformed round steel bar and has a diameter of 12mm.

For surface area of steel bar= pi*diameter*length For cross-sectional area of steel bar= pi (dia)^2/4

volume of steel multiplied by7850= wt of steel in kgs. Please note that wt of 1 Cum steel is 7850 kg Volume of steel bar can be calculated = cross-sectional area of bar X length cross-sectional area of Bar= pie x d X d/4 (where d is diameter of bar)

A steel bar can make a: Steel dagger, Steel Medium helm, and a Steel sword if you're a non member. There are various other things you can make if you're a member.