answersLogoWhite

0

What else can I help you with?

Continue Learning about Math & Arithmetic

How many 6 inch floor tiles would it take to go arcross a hallway 8 feet wide?

You would need 16 tile to go across the width of the hallway.


What the average width of a school hallway?

The average width of a school hallway typically ranges from 4 to 8 feet (1.2 to 2.4 meters). This width allows for safe and efficient movement of students and staff, accommodating foot traffic during class changes and emergencies. Some hallways may be wider in areas with high foot traffic or near entrances. Local building codes and school design standards can also influence hallway dimensions.


Minimum ridge width needed for 4mm implant?

7 mm


What is the minimum width of a driveway?

The minimum width of a driveway typically ranges from 10 to 12 feet for a single-car driveway, allowing enough space for a vehicle to pass comfortably. For a two-car driveway, a width of at least 20 to 24 feet is recommended. Local zoning regulations may also influence minimum width requirements, so it's essential to check with local authorities before construction.


What is the minimal width of a hallway at school?

The minimal width of a hallway in a school typically varies by local building codes and regulations, but it is often set between 36 to 44 inches to ensure safe movement and accessibility. This width allows for the passage of students and staff, including those with disabilities. Additionally, wider hallways may be required in areas with high foot traffic to facilitate emergency evacuations. Always consult local regulations for precise requirements.

Related Questions

What is the minimum width of house hallway?

Building codes for a single family dwelling typically require hallways to be a minimum of 3 ft (36 inches) in width. A hallway that is 5 ft (60 inches) in width comfortably allows for the passage of two people. As a side note, the width of a typical wheelchair is 22 inches.


What is the residential building code for width of hallway?

Residential building codes vary substantially from municipality to municipality and should be checked locally, but at minimum a hallway width should be no less than 36 inches.


What is the minimum hallway width in a residential building?

The minimum hallway width in a residential building is typically 36 inches (3 feet) according to many building codes. This width allows for safe passage, including for individuals with mobility aids. However, local regulations may vary, so it's important to check specific building codes applicable to the area.


A hallway has an area of 63 square feet The length of the hallway is 7 times longer than the width What is the width of the hallway?

3 feet.


A hallway has an area of 63 square feet. The length of the hallway is 7 times longer than the width. What is the width of the hallway?

3 feet.


What is the average width of a hotels hallway?

Answer


A hallway has an area of 63 square feet The length of the hallway is 7 times longer than the width What is the length of the hallway?

21 feet


The hallway has an area of 63 square feet the length of the hallway is 7 times longer than the width what is the length of the hallway?

3 feet


The length of a rectangular hallway is three times the width the perimeter is 72ft find the dimensions of the hallway?

Length is 3/4 of 36 ie 27 ft, width is 9 ft


The length of the hallway is 5 feet longer than the width and the area is 50 square feet What are the dimensions of the hallway?

5 and 10


What is the California building code standard for a commercial hallway width?

48 inches


What is width of standard door?

There is not a quote "standard" door width as doors can be purchased in 2" increments. There are a few building code restrictions for minimum width of certain doors. Like an egress door is required to be 36 inches in width for a residence. There can also be minimum widths for handicap accessibility. These doors in a house need to have a clear opening width of 30 inches.