answersLogoWhite

0

What else can I help you with?

Related Questions

Scotts turf builder plus with weed controlwhat is the setting when using the speedy green 2000?

You would want to use spreader setting 3.25


Scotts Speedy Green 2000 spreader settings for 4lb per 1000 sq ft of Eagle 0.39 Granular Turf Fungicide?

setting @6


What setting should I use for fall feeding using a scott's speedy green 1000 spreader and 20-1-4 Naturlawn nutrient?

Set the Scott's Speedy Green 1000 spreader to the recommended setting for the 20-1-4 Naturlawn nutrient as indicated on the product packaging or by using a calibration test. Apply the fertilizer evenly over your lawn, ensuring to follow all safety and usage instructions provided.


What is the setting on a Scott's speedy green 2000 spreader for 19-19-19?

For a Scott's Speedy Green 2000 spreader, the recommended setting for applying 19-19-19 fertilizer is typically around 5 to 6. However, it's important to check the manufacturer's guidelines or refer to the specific fertilizer bag for exact settings, as they can vary based on the product and application method. Always conduct a test run on a small area to ensure even distribution.


What is the setting on a Scott's speedy green 2000 spreader for lawn seed?

set on 3.25


What are the settings for a scotts speedy green 2000 for mk minerals pelletized gypsum?

For applying MK Minerals pelletized gypsum with a Scotts Speedy Green 2000 spreader, you typically want to set the spreader to a medium setting, usually around 10-12 for even distribution. However, it's best to consult the specific product label for MK Minerals gypsum for any recommended settings. Additionally, check your spreader calibration and adjust the rate based on your lawn size and application requirements for optimal results. Always perform a small test area first to ensure proper coverage.


What is the setting on scotts speedy green 2000 for 10 lb per 1000 square ft?

It really depends on the size of the product that you are putting down. Tiny pieces of per-emergent or pest control product will empty much faster on a setting of say 6 than a larger product like fertilizer. So settings will vary. To effectively and responsibly apply your product I'd suggest that you contact the manufacture of the spreader or the material you are spreading.


What is the setting on a speedy green 2000 for ammonium Nitrate?

The recommended setting for ammonium nitrate on a Speedy Green 2000 spreader is typically around 19 to 21. It is always a good idea to refer to the manufacturer's guidelines or consult with a professional to ensure proper application.


What is the setting on a Scott's speedy green 2000 spreader for ortho bug b gone?

For the Scott's Speedy Green 2000 spreader, the recommended setting for applying Ortho Bug B Gone is typically around 3 to 4. However, it's always best to check the product label for specific instructions, as application rates may vary based on the formulation. Additionally, calibrating your spreader based on your lawn size and the product's coverage guidelines can ensure effective application.


What is the setting on a Scott's speedy green 2000 spreader for tall fescue grass seed?

Overseeding -- 7 1/2 New Lawn/ Bare spot -- 18 but it would be best to go over the lawn twice at setting 7 1/2 in perpendicular directions.


How do you calibrate scotts speedy green 2000 spreader?

A) Adjust the micrometer setting to 2.B) Squeeze the trigger against the handle.C) The calibration line engraved on the top of the shutoff plate should be flush with the back edge of the hopper opening.D) To adjustalignment, use a small wrench or pliers to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.http://www.scotts.com/smg/goART2/InfoHowTo/spreader-settings-for-grass-seed-and-lawn-food/19500090/7200009(MORE)


How do you calibrate a Scotts Speedy Green 1000 spreader?

To adjust calibration, do the following:A) Adjust the micrometer setting to 11.B) Squeeze the trigger against the handle.C) The calibration line engraved on the top of the shutoff plate should be flush with the back edge of the hopper opening.D) To adjust alignment, use a small wrench or pliers to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.http://www.scotts.com/smg/goART2/InfoHowTo/spreader-settings-for-grass-seed-and-lawn-food/19500090/7200009