answersLogoWhite

0


Best Answer

Diaphragm

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the technical name for the cone of the speaker?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How can you tell how big a speaker is?

To approximate the diameter of a speaker cone, find the approximate center. And then stick a ruler across the center of the speaker cone. This will give you the size of the speaker.


How to remove magnet from a speaker?

To remove a magnet in a speaker, first detach the grill in the front of the speaker, second unscrew the speaker after that remove the speaker from the cabinet and cut the speaker cone. Lastly, gently discard the magnet from the speaker cone.


What is the difference between a two way and three way speaker?

A two-way speaker has two speaker cones built into one speaker assembly: one cone to generate lower-frequency sounds and one cone to generate higher-frequency sounds. The low-range speaker cone is larger, the high-range cone is smaller. In car speakers, the low-range speaker cone usually occupies most of the area of the speaker, and is made from a light-weight, paper-like material, sometimes painted black, sometimes gray. A three way speaker has three speaker cones built into the assembly, an additional cone for mid-range frequency sounds.


What is use of megnetic force in speaker?

The magnetic force in a speaker is used to drive the motion of the speaker cone. When an audio signal passes through a coil of wire (voice coil) attached to the speaker cone, it creates a magnetic field that interacts with the permanent magnet in the speaker. This interaction results in the movement of the speaker cone, producing sound waves.


What do you mean by 2 way audio system?

it means that the speaker has a speaker cone for the bass and mid frequencies and a tweeter for the high frequencies. this makes it a 2 way audio system. a three way audio system would have a speaker cone for the bass, another speaker cone for the mids, and a tweeter for the highs.


Who invented speaker cone?

Clair Farrand


You home theater speakers are crackling What should you do?

The most common cause is bad wiring. Check the connections or replace the speaker wiring. If that does not work, check which speaker has the problem and see if a cone is blown. To do this, place your ear near the cone and gently press it in (don't push to hard). If the cone is blown you will hear a raspy rubbing sound when the cone moves. Replace the cone or the speaker if it is blown. If this does not work, change your speaker connections around to see if it is the amplifier.


What is causing the speaker 0n your screen to distort the voices?

Torn speaker cone is one possibility.


Where is a magnet located on a speaker?

At the back of the cone where the wires connect in


Inside a stereo speaker you will find two permanent magnets one on the cone and one near the cone?

The permanent magnets in a stereo speaker are used to create a magnetic field that interacts with the electrical current flowing through the voice coil attached to the speaker cone. This interaction causes the voice coil to move back and forth, pushing and pulling the cone to produce sound waves. The permanent magnet near the cone provides a stationary magnetic field, while the magnet on the cone moves with it to drive the sound production.


Does sound come from the center of a speaker cone?

Sound typically comes from the entire surface area of a speaker cone, not just the center. The cone moves in response to electrical signals, displacing air particles and producing sound waves that travel through the air. The vibration of the entire cone, not just the center, is what produces sound.


What is the birth name of Dave Cone?

Dave Cone's birth name is Dave A. Cone.