The timing for a 1973 Chevrolet 454 engine is typically set to around 4-6 degrees before top dead center (BTDC) at idle, with the engine running at around 600-800 RPM. However, it's important to consult the specific service manual for your vehicle, as timing can vary based on factors like emissions equipment and specific vehicle configurations. Always use a timing light for accurate adjustments.
454 + 454 + 454 + 454 + 454 + 454 = 2724
454 = CDLIV
454 is only divisible by the following factors: 1, 2, 227, 454.
454 + 333 = 787
454 divided by 5 is 90.8
No need to if the distributor was not moved.
what are the factory timing specs for a 1977 chevy 454
Yes, but some had a very thick teflon coating that could break off and mess up the timing..
what is the ignition timing for a 1988 Chevy 454 engine
timing for the 454 engine is 10 degree's at TDC at 700 rpm in neutral or park
A timing CHAIN
The 1973 model 454 had---250 HP @ 4000 RPM with a 4- bbl carb. After 1973 the horse power went down about 10 HP before 1973 the 454 had 450HP so Chevy said. the 454 actually had close to 500HP
#1
The base ignition timing for a 1974 Chevy 454 engine is between 8 and 12 degrees below top dead center. A timing light is needed to accurate set ignition timing.
were dos the dots need to be on the timing chain together or apart
the 454 out of the chevelle in 73 had 265 horse.
Yes.