Q: What is the volume of 12 pipe?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

The volume of a 12 inch x 12 inch pipe is: 1,360 cubic inches

Assuming the 12" pipe means 12" internal diameter, giving us a 6" radius: Volume of a cylinder is (pi) r^2 h (3.14) (6*6) (12) = (3.14) (36) (12) = 1356.48 cubic inches.

The volume of the pipe is 1,154.5 cubic feet.

measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe

Answer:10/3 hour = 3 Hour and 20 minutesSolution:the volume of cistern (V) = 1 volume unitflow rate of pipe A = 1/6 V/hourflow rate of pipe B = 1/8 V/hourVolume filled = flow rate * timein the first two hours the volume filled = 1/6 * 2 + 1/8 *2 = 7/12 V.Remaining Volume = 1-7/12=5/12the folw rate after two hours = 1/8 (just pipe B)required time for pipe B to fill the cistern = Volume / flow rate of the pipe B= 5/12 divided by 1/8= 5/12 * 8/1 = 10/3 hours = 3 and 1/3 hours = 3 hours and 20 minutes.Check:if the answer is correct the volume should be 1:Total volume = 1/6*2 + 1/8*2 + 1/8*10/3 = 1.so, the answer is correct.Cheers!

Related questions

The volume of a 12 inch x 12 inch pipe is: 1,360 cubic inches

A 100-foot pipe with an inside diameter of 12 inches has a maximum volume of about 78.54 gallons of water.

Assuming the 12" pipe means 12" internal diameter, giving us a 6" radius: Volume of a cylinder is (pi) r^2 h (3.14) (6*6) (12) = (3.14) (36) (12) = 1356.48 cubic inches.

To find the volume of a pipe, you can use the formula for the volume of a cylinder: V = πr^2h, where r is the radius and h is the height of the cylinder. For a 2-inch diameter pipe, the radius is 1 inch. Thus, the volume of 12 inches of 2-inch pipe would be π * 1^2 * 12 = 12π cubic inches.

A pipe that is 30 inches in diameter and 12 feet long has a volume of: 440.6 US gallons of water.

The volume of this pipe is 28,510,000 mm3

To calculate the volume of a pipe, you can use the formula for the volume of a cylinder: Volume = πr^2h where r is the radius of the pipe and h is the height (length) of the pipe. Measure the radius and length of the pipe, plug them into the formula, and solve for the volume in cubic units.

The volume of this pipe would be 0.3817 m3

The volume of the pipe is 1,154.5 cubic feet.

The internal diameter of the pipe times pi times its length will yield the volume it can contain. The outer diameter of the pipe times pi times its length will yield the volume that the pipe will displace when it is submerged or buried. The volume the pipe will displace minus the volume it will contain will yield the volume of material that makes up the pipe.

The volume of this pipe is 261.8 cubic feet.

measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe