Wiki User
∙ 6y agoThe volume of the box is 36 * 24 * 18 = 15552 cubic inches.
----------------------------------------------
1 ft = 1/3 yd
→ volume = 1 yd × 2 ft × 1.5 ft
= 1 yd × (2 × 1/3) yd × (1.5 × 1/3) yd
= 1/3 cu yd
= 0.333... cu yd
≈ 0.33 cu yd
1 yd = 0.9144 m (exactly)*
→ 1 cu yd = 1 yd × 1 yd × 1 yd = 0.9144 m × 0.9144 m × 0.9144 m = (0.9144)³ cu m
→ 1/3 cu yd = 1/3 × (0.9144)³ cu m
= 497757069/1953125000 cu m
= 0.25485.... cu m
≈ 0.25 cu m
* derivation of 1 yd = 0.9144m (exactly):
1 in = 2.54 cm = 0.0254 m (exactly)
1 yd = 36 in = 36 × 0.0254 m = 0.9144 m (exactly)
If you are using an approximation for 1 inch in centimetres, then
1 yd ≈ 36 × approximation ÷ 100 metres.
eg if 1 in ≈ 2.5 cm, then
1 yd ≈ 36 × 2.5 ÷ 100 m = 0.9 m
and volume ≈ 1/3 × (9/10)³ cu m = 243/1000 cu m = 0.243 cu m
Wiki User
∙ 6y agoThere are no linear feet in a cubic yard as they are different units of measurement. A linear foot measures length, while a cubic yard measures volume.
You cannot convert between the two. Cubic feet measures volume and feet measure length.
The volume of such a room is 480 cubic feet.
3.5 x 3.5 x 3.5 = 42.875 cubic feet
The volume of a pipe that measures 8 feet in length and 24 inches in diameter is: 25.133 cubic feet (about 188 US gallons).
Cubic metres.
An inch is a unit of length. A cubic foot is a unit of volume. The two units are therefore incompatible.
The volume of a 4.11-foot cube is: 69.43 cubic feet.
There are no linear feet in a cubic yard as they are different units of measurement. A linear foot measures length, while a cubic yard measures volume.
cubic measures such as cubic feet, cubic meters
Multiply the cubic metres by 35.315 to get cubic feet.
You cannot convert between the two. Cubic feet measures volume and feet measure length.
The volume of such a room is 480 cubic feet.
You can't convert cubic metres into feet because the first is a measure of volume and the second is a measure of length.
3.5 x 3.5 x 3.5 = 42.875 cubic feet
The volume of a pipe that measures 8 feet in length and 24 inches in diameter is: 25.133 cubic feet (about 188 US gallons).
Furnace volume is typically measured in cubic feet, not square feet. This measurement refers to the total space within the furnace where combustion takes place and heat is generated. Square feet is used to measure the surface area of a space, while cubic feet measures the total three-dimensional volume.