you multiply it together so it is 28,080(your measurement here)^3
A triangle with side a: 26, side b: 26, and side c: 17 inches has an area of 208.86 square inches.
The diameter of a regulation beach volleyball is 26 inches. What is the volume?
Volume = 4/3*pi*143 = about 11494 cubic inches
Need the length of the tank also to determine the amount of oil
To answer this question we need to convert both into like measuring units, we pick inches. First convert the 2 and a quarter feet to inches. 2.25*12= 27 now compare, which is bigger 27 or 26 inches 27 inches is obviously bigger so two and a quarter feet are bigger than 26 inches.
A triangle with side a: 26, side b: 26, and side c: 17 inches has an area of 208.86 square inches.
The diameter of a regulation beach volleyball is 26 inches. What is the volume?
Volume = 4/3*pi*143 = about 11494 cubic inches
V = 6,032 cubic inches.
Need the length of the tank also to determine the amount of oil
If the tank is rectangular and 61-1/2 inches long that is 5.125 feet. 22 inches wide that is1.833 feet. 34 inches deep that is 2.833 feet. Multiply 5.125 by 1.833 by 2.833 that = 26 cubic feet. Multiply 26 by 7.5 = 195 us gallons. If the tank is oval provide length of tank, width of tank, and depth of water in the tank! From your dim. I can not tell what is L,W,or D
To answer this question we need to convert both into like measuring units, we pick inches. First convert the 2 and a quarter feet to inches. 2.25*12= 27 now compare, which is bigger 27 or 26 inches 27 inches is obviously bigger so two and a quarter feet are bigger than 26 inches.
They are usually about 24-26 inches high
The container has a volume of 4160 cubic inches (26x16x10). Assuming you are talking about gallons of water, it will hold 18 gallons (231 cu in per gallon).
18 inches = 1.5 feet1 cubic foot = 1,728 cubic inchesVolume = 1.25 x 1.5 x 26 = 48.75 cubic feet = 84,240 cubic inches
I'm not sure your question is going to get the answer your looking for but here is how it works. cubic feet is width in feet times height in feet times depth in feet (w*h*d=v or volume). 1 cubic foot equals 1728 cubic inches. If the 26 for depth and width is measured in inches then your "oven" height is 1728 divided by 26 then divided by 26 again (h=v/w/d). That would make your oven height 2.56 inches. That just doesn't seem to be reasonable for an oven so you may want to edit your question.
You could be experiencing a low amniotic fluid volume, which can throw the measurement off.