0
What else can I help you with?
What is the area of a sheet of metal which is 8 ft 3 inches long and 2.60 meters wide?
Convert both dimensions into feet or meters and multiply them to obtain square feet or square meters
What are the dimensions of a king bed sheet?
76" wide and 80" long
What is the size of an uncut sheet of 32 one dollar bills?
About 26 wide by 22 high
A sheet of paper is 8.5 inches wide and 11 inches long The sheet is printed with a margin 1.25 inches wide on all four sides Find the perimeter of the printed part of the page?
The perimeter of the printed part of the page would be 29 inches.
What does 4 thousants look like on a feeler gauge?
A 4 thousandths (0.004 inches) feeler gauge is a thin metal strip, typically around 1 inch wide and 6 inches long, marked with the measurement. It is part of a set used for measuring gaps or clearances in mechanical applications. When used, it should fit snugly between two surfaces without excessive force, indicating a precise gap of 4 thousandths of an inch.
What is the minimum sheet metal gauge to have no oil canning on a flat sheet metal surface 20 inches wide x 96 inches high?
12 gage
How many sheets in a tone of iron sheet?
You have failed to include needed information: How thick of sheet, probably stated in gauge if for thin sheet metal. How long and wide. And did you really mean Iron sheet? This is not available anymore, you probably want to know about particular type of steel or galvanised steel.
What are sheet metal pliers?
They are pliers with a very wide gripping end, often converted from vice grips. I have 3 different with 2, 4 and 6 inch wide blades. Not strong, but capable of putting a very good bend on thin steel or alloy sheet.
Sheet metal 1.12 meters wide strips 3.4 cm wide are cut - allowing 3 mm for cutting each strip determine the number of complete strips cut?
it's 30. stupid trade calculations.
If a sheet of metal is 3.5 yard long and 2.2 yards wide what is it's approximate area in square meters?
To convert the dimensions from yards to meters, multiply by 0.9144 (1 yard = 0.9144 meters). Thus, the metal sheet is approximately 3.20 meters long and 2.01 meters wide. The area of the sheet is approximately 6.43 square meters (3.20 meters x 2.01 meters).
How many meters wide is broad gauge railway track?
Broad gauge railway track is appproximately 5-foot 6 meters wide
What is Lexan Polycarbonate Sheet?
Lexan is the brand name for polycarbonate sheet and resin in a wide range of grades.
How wide is a king size sheet?
76 inches wide by approximately 80 inches long
What is the area of a sheet of metal which is 8 ft 3 inches long and 2.60 meters wide?
Convert both dimensions into feet or meters and multiply them to obtain square feet or square meters
Full-size sheet dimensions?
A full-size flat sheet is 54-inches wide and 75-inches long. A full-size fitted sheet is 81-inches wide and 96-inches long. A full-sized mattress is 54-inches wide by 75- inches long.
A wide thin sheet like tendon is known as?
Aponeurosis
Where do you buy color of the wind sheet music?
Try J.W. Pepper. They'll have a wide variety of Disney sheet music.
