0
What is the weight of a steel plate that is 1half inch thick 20 wide inch and 45 inch long if the steel weight .28 lb per cubic inch?
Wiki User
∙ 12y ago
The volume of the plate is (0.5 x 20 x 45) = 450 cubic inches
The weight is (450) x (0.28) = 126 pounds
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the weight of W50 grade 1 steel?
what is the weight per cubic inch of W50 steel
How much would a 1 ftx 1 ft x .375 thick piece of plate steel weight if a cubic ft of steel weight is 490lbs?
The answers is: 15.315 lbs. Cubic Ft Weight (Lbs) 1ft X 1Ft X .375 in <> .375 CF ---------> ? 1ft X 1Ft X 1Ft <> 1 CF ---------> 490 (490*.375)/1= 15.315lbs.
Weight of 4'X8'X1 steel plate?
2000
What is weight of 12 inch dia x 12 inch round steel?
3.14159 x radius squared x thickness x .283 (weight of 1 cubic inch of steel)
How much does a square foot of a one inch steel plate weigh?
Steel is typically 490 lb/cubic foot. There are 1,728 square inches in a cubic foot which means that each cubic inch weighs about .284 pounds (just a bit over a quarter of a pound per square inch).
What is the weight of a Cubic meter weight of galvanised steel plate?
The density of steel is 7850 KG/M3
What is the weight of 25mm steel plate?
The weight of a 25mm thick steel plate can vary depending on the density of steel, which is typically around 7.85 grams per cubic centimeter. To calculate the weight, you would need to determine the dimensions (length and width) of the plate. Then, you can multiply the volume (length x width x thickness) by the density to get the weight in grams or convert it to kilograms or pounds as needed.
What is the weight of W50 grade 1 steel?
what is the weight per cubic inch of W50 steel
If the height width thickness of steel plate is 170x60mm 4mm thick then what is weight of steel in kg?
To calculate the weight of the steel plate, first calculate its volume by multiplying the dimensions (170x60x4 mm^3). Then convert the volume to cubic meters (1 m^3 = 1,000,000 mm^3). Finally, multiply the volume by the density of steel (usually around 7850 kg/m^3) to get the weight in kilograms.
What is the weight of steel .25 cubic meter?
The weight of steel can vary based on the type and density, but on average, the density of steel is around 7,850 kilograms per cubic meter. Therefore, the weight of 0.25 cubic meters of steel would be approximately 1,962.5 kilograms.
What is the kg weight of 10mm thick steel plate size 400 x 400mm?
The weight of the steel plate can be calculated using the formula: Volume = Area x Thickness. First, calculate the area of the plate (400mm x 400mm = 160,000 sq mm). Then convert it to sq meters (160,000 / 1,000,000 = 0.16 sq m). Finally, using the density of steel (7850 kg/cubic meter), calculate the weight (0.16 sq m x 0.01 m x 7850 kg/cubic m). The total weight is approximately 12.56 kg.
What is Weight of steel plate per square foot?
That would also depend on the thickness of the steel plate.
Weight of steel per cubic inch?
Steel is an alloy - a mixture of various metals - and so its density depends on the proportion of the constituents in the alloy. The weight (not mass) varies between 9.0 and 9.3 pounds weight per cubic inch.
Where Can You Find a Steel Plate Weight Chart?
Piping Project is one of the leading Steel Plate Weight Chart in kg. The weight of a circular bar is subject to various factors, such as its diameter, length, and composition. The Steel Plate Weight Chart in mm typically comprises a tabular representation of the diverse parameters, including diameter, length, and weight. A Steel Plate Weight Chart is a planar, rectangular sheet of steel that exhibits uniform thickness across its entire surface.
How do you figure the weight of a Stainles Steel plate if you know the size and density?
To calculate the weight of a stainless steel plate, multiply the volume of the plate (length x width x thickness) by the density of stainless steel (typically around 8000 kg/m^3). The resulting value will give you the weight of the stainless steel plate in kilograms.
How much does SA 516-70 weigh per square foot?
The weight of SA 516-70 steel plate per square foot varies depending on the thickness of the plate. As a general estimation, the weight of SA 516-70 steel plate is approximately 41.82 pounds per square foot for a 1-inch thick plate. You can calculate the weight for different thicknesses using this basic weight per square foot.
How much does a plate of 12 4x8 sheet of plate steel weigh?
The weight of a plate of steel can vary depending on the thickness of the steel. A rough estimate for mild steel would be around 0.0283 pounds per cubic inch. To calculate the weight of a 4x8 sheet of steel, you would need to know the thickness of the steel in inches. Multiplying the area of the sheet (4x8=32 square feet) by the thickness of the steel will give you the volume of the steel. Multiply the volume by the weight per cubic inch to get the total weight of the sheet.
