answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What is the weight of pine logs per thousand board feet?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the difference between the Doyle scale and the International scale of measuring logs for lumber?

== == Since each of the log rules was developed using different methods with different assumptions, it is logical that they will not always result in the same volumes for given size logs. Table 1 shows a comparison of the three log rules for 16-foot logs ranging in diameter from 6 to 40 inches. Compared to the International Rule, both the Scribner and Doyle Rules underscale logs of smaller diameters. For example, a 12-inch-diameter log contains 95 board feet on the International scale, 80 board feet on the Scribner scale, and 64 board feet on the Doyle scale. Overall, the Doyle Rule will result in lower log volumes than the International Rule, up to a log diameter of 30 inches. Since nearly all logs in Virginia are below 30 inches in diameter, for all practical purposes the Doyle Rule will underestimate the actual board footage. If you are selling stumpage or logs, it is important to recognize the differences in volume associated with the different log rules. Since stumpage or log prices are based on the timber or log volume, you will receive substantially more income with the rules that scale your sizes higher. For example, take a log of 16 inches diameter x 16 feet in length and a value of $100 per thousand board feet. This log would have the following volumes and values based upon the different log rules: {| ! LogDiameter(in.) ! Log Rule ! Volume(board feet) ! Value ($) | 16 International 180 18.00 16 Scribner Decimal C 160 16.00 16 Doyle 144 14.40 |}


Can a 12 yard dump truck carry 25 ft logs?

Sure. 12 yards is 36 feet, so the truck can easily carry 25 foot logs. ■


What is the average weight of a 25 year old pine tree in nz?

The weight of a pine is estimated by calculating the board footage of the tree. To do this it is necessary to have the length and circumference of the logs. To find the weight, one will need to multiply the diameter of the small end of the log by the length of the log. This is then multiplied by 0.37. 50.93 is added to this total. This results on the predicted weight in pounds. There are many factors, such as moisture content, that can affect these numbers.


What is the definition for a cord of wood?

A cord of wood is a unit of measurement used for firewood, equal to a stack 4 feet high, 4 feet wide, and 8 feet long. It is often used to quantify the amount of firewood being sold or stored.


Since everywhere Ive read it says the Egyptians used logs to move the stones for the pyramids why didnt they use wheels since they had already been around for thousands of years?

It would have been a matter of the weight of the blocks, as they usually weighted several tons they had nothing strong enough to bear such weight. With logs it was the ground which bore the weight.


How much do willow logs sell for?

I am assuming this is on the grand exchange, willow logs sell for ridiculously little. This is the reason they are usually used as weight in trades. I have not checked the general store sell price for this item.


How are rotting logs similar to burning logs?

They both r logs


are they buying cedar logs?

are they buying cedar logs and how much they paying are they buying cedar logs?


What is birling unit?

A birling unit is a measurement used in forestry to estimate the volume of a tree's trunk. It typically corresponds to a section of tree trunk that is 16 feet long and 4 feet in diameter. Birling units are commonly used in logging operations to calculate timber volumes.


How much do oak logs weigh?

On average, a fresh oak log can weigh between 2,400 to 2,900 pounds per cord (128 cubic feet). The weight can vary depending on the moisture content, type of oak, and size of the log.


How do you convert weight in ton such as logs to cubic meter?

The conversion is not possible.Ton is a unit of mass and cubic meter is a unit of volume; you need the density.


What are the animals that live's in logs?

animals live's in logs