To calculate the volume of one paving stone, you would multiply the length, width, and depth in cubic centimeters. Then, if 1 cm³ of gold is g, you would convert the volume of the paving stone into grams of gold. Finally, you would divide the total weight of gold (100 million pounds) by the weight of one paving stone to determine how many solid gold paving stones you could buy.
The answer, not surprisingly, depends on the size of the paving bricks. And since you have not bothered to share that crucial bit of information, I cannot provide a more useful answer.
You would also need to know what area each brick covers. Or what is the length and width of each brick - you can then figure out the area from that.
It can vary widely. Anywhere from .60 per wall area ft for a wash and over coat with 2 coats of a direct to metal paint (DTM) the lightest duty industrial paint, up to $20/ wall area foot for food plant surfacing of block with a epoxy intermediate coat and a urethane top coat.
The noun coat is a count noun: one coat, two coats.
Heavy enough to kill you if it falls on top of you.
top coat and base coat are basically the same just the top coat is shinier so it should be OK.
"Top coat" is considered a singular compound noun. It denotes a single final layer or coating applied on top of something, such as nail polish or paint.
There are many places where one can purchase a top coat. One can purchase a top coat at popular stores such as Jos A. Bank, Burberry, J. Crew, and Lands' End.
Ïf you don't use base coat the top might either not stick properly, or it might not cover properly. If you put the base coat on the top coat you won't get the gloss and maybe not even the color that you intended.
There is a company called APC, The Asphalt Paving Company. Other companies providing the same service are John R. Hulrley Asphalt, Avery Asphalt, Asphalt Coatings Company, Seal Coat Specialties. There are many others located in Colorado.
If it is single stage paint then no if base coat then yes....
Hogan's Heroes - 1965 The Top Secret Top Coat 2-29 is rated/received certificates of: Australia:G
bear
Coat
Yes! Make sure that you paint the very ends (the tips, the parts that you file) with a light coat of polish, then with top coat. Also, make sure that you add top coat every two - three days! Don't forget your base coat, and when painting on your color, make your first coat light, let it dry for 5-7 mins, then the second coat can be a tiny bit thicker. Let that dry a minimum of 15 mins.
Hobart Paving was created in 1993-05.