answersLogoWhite

0

You can use either 10W30 or 5W30 any of these will be fine. If you want you can buy these in a synthetic blend or full synthetic. I normally stick with the blend unless I feel like spoiling my car.

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Math & Arithmetic

What are items that are 1 Quart?

Milk, Buttermilk, Motor Oil, Juice


How much oil in a 103 cubic inch harley motor?

3.8 liters


How much oil does a hrx 217 require?

The Honda HRX217 lawn mower typically requires approximately 18 ounces (or 0.54 liters) of oil when performing an oil change. It's important to use the recommended oil type, which is usually 10W-30 or SAE 30, depending on the temperature conditions. Always check the owner's manual for specific instructions and recommendations regarding oil capacity and maintenance.


What oil do you use in srad 750?

For the Suzuki GSX-R750 (often referred to as the SRAD 750), it is recommended to use high-quality synthetic motorcycle oil with a viscosity of 10W-40. Look for oils that meet or exceed JASO MA or MA2 specifications to ensure optimal performance and protection. Always check the owner’s manual for specific recommendations and intervals for oil changes.


What w meant in sae 20 w?

SAE (Society of Automotive Engineering) 20W is a quality (viscosity) of oil. SAE J300 has established eleven viscosity grades, of which six are considered Winter-grades and given a W designation. The 11 viscosity grades are 0W, 5W, 10W, 15W, 20W, 25W, 20, 30, 40, 50, and 60. These numbers are often referred to as the 'weight' of a motor oil. The lower the viscosity grade, the lower the temperature the oil can pass the standard test. For example, if an oil passes at the specifications for 10W and 5W, but fails for 0W, then that oil must be labeled as an SAE 5W. That oil cannot be labeled as either 0W or 10W.