A diameter is the distance from one side of a spherical or circular object, through the centre, to the other. It can be as small as an atomic sub-particle or as large as a red super-giant star.
There is absolutely no way that 6 millimetres can be "converted" to diameter.
Radius = 1/2 of the diameter = 328/2 = 164 millimeters
If the measurement of eleven millimeters refers to the diameter of the circle, then the radius would be half of that, which is 5.5 millimeters. If the eleven millimeters is already the radius, then it remains 11 millimeters. Please clarify if you meant diameter or radius for a precise answer.
Nineteen millimeters.
24.30mm
No such formula exists. The diameter of a circle is a linear measure, square measure are for areas.
60 millimetres
The diameter is twice the radius so the answer is 12 millimeters.
The standard diameter of an M6 screw is 6 millimeters.
A 6 screw typically has a diameter of 3.5 millimeters.
The standard size of an M6 screw is 6 millimeters in diameter.
The standard size of an M6 screw is 6 millimeters in diameter.
Raindrops can vary in size, but on average they are about 1 to 2 millimeters in diameter. Some larger raindrops may be 4 to 6 millimeters in diameter, while smaller raindrops can be less than 1 millimeter in diameter.
the type of percipitation it would be cloud seeding
Radius = 1/2 of the diameter = 328/2 = 164 millimeters
The standard screw diameter in millimeters for an 8 screw is approximately 4.2mm.
20 millimeters
The standard size of a 6mm drill bit is 6 millimeters in diameter.