Multiply 37 x 30 to get the square footage.
The volume is zero. "30 inches by 30 inches" is a flat, square place, on a table, a piece of paper, or the ground. You can't put anything in it because it has no "in" .
Radius: square root of (2808/pi) = 30 feet rounded Diameter: 2*30 = 60 feet
30
If the sample size is less then 30 use the T table, if greater then 30 use the Z table.
For a Rectangle table: Measure the width and length of your table, then subtract those numbers from the width and length of the tablecloth and then divide by 2. For a Round table: Measure your table at its widest, then subtract from the tablecloth diameter and then divide by 2. Example: Your table is a 60" round. The tablecloth is a 90" round. 90"-60"=30" 30" divided by 2=15" 15" the drop around the table!
That completely depends on the height of table top above the floor. The width of the tablecloth needs to be the width of the table (60") plus twice the height from the floor. So, if the height from the floor is 30", the tablecloth needs to be 120" wide.
If the size is 30 inches x 8 inches then the area = 30 x 8 = 240 square inches. If the size was in feet, multiply 240 by 144.
The standard size of a ping pong table is 5 feet wide by 9 feet long.
That's 1,440 square inches.
Multiply 37 x 30 to get the square footage.
20 x 30 = 600 square cm
numbersquaresquare root111.000241.414391.7324162.0005252.2366362.4497492.6468642.8289813.000101003.162111213.317121443.464131693.606141963.742152253.873162564.000172894.123183244.243193614.359204004.472214414.583224844.690235294.796245764.899256255.000266765.099277295.196287845.292298415.385309005.477the following link includes required table.
The volume is zero. "30 inches by 30 inches" is a flat, square place, on a table, a piece of paper, or the ground. You can't put anything in it because it has no "in" .
Radius: square root of (2808/pi) = 30 feet rounded Diameter: 2*30 = 60 feet
30 528 km2 or 11 787 sq mi
30