A 4 x 8 tablecloth would be suitable.
To find the correct size table linens you have to start with shape: square, oval, oblong, or round. Then you must measure the table and account for drop on the sides. Using this formula should give you an estimated size: Length of table + (desired dropx2)=tablecloth length. Width of table + (desired drop x2 ) = tablecloth width.
The basic difference between oblong and oval is the shape at the short end. i.e. An oval is rounded at the short end and straight in the middle. To draw them it can be represented as [] =oblong (rectangular) & 0 =oval A true oval tapers to the ends, while an oblong shape has parallel sides (an oblong is an extended square or circle). So if your intent is to put a tablecloth on a round table after adding leaves, an oblong tablecloth would be best. An oval tablecloth of the right length might not be wide enough at some points, and the problem gets worse as you add more leaves. That said, the tablecloth sellers I looked at online all make their "oblong" tablecloths as rectangles, not elongated circles. If you want an elongated circle, to provide even overhangs on a circle with leaves, use a custom tablecloth site. Here is a table linens size chart that may be of some help. http://www.TableclothsForLess.com/tablecloth-sizes.html
That would depend on the size of the rectangle. your stupid.
Yes, it's just doubled in size.
72 inches
Table linen size will depend on the drop you need. For a 5 foot diameter (60 inch) ROUND table and using a 90 inch ROUND tablecloth your drop would be 15 inches all around the table. For a 5 foot diameter (60 inch) SQUARE table and using a 85 inch SQUARE tablecloth your drop would be 12 and a half inches all around.
A 4 x 8 tablecloth would be suitable.
If the table height is 29 inches then 132 inches tablecloth perfect fit and it will give drop up to the ground.
learn math
Probably an 84 square inch tablecloth. It depends on the shape and size of your table.
If the table is 42 inches in diameter and the height is 29 inches then 102 inch tablecloth is perfect fit which gives drop to the ground.
To find the correct size table linens you have to start with shape: square, oval, oblong, or round. Then you must measure the table and account for drop on the sides. Using this formula should give you an estimated size: Length of table + (desired dropx2)=tablecloth length. Width of table + (desired drop x2 ) = tablecloth width.
That completely depends on the height of table top above the floor. The width of the tablecloth needs to be the width of the table (60") plus twice the height from the floor. So, if the height from the floor is 30", the tablecloth needs to be 120" wide.
A drop is seldom consistent around the entire table with a standard tablecloth, because there are so many different size tables and only a few standard tablecloth sizes. This is not a problem so long as the cloth does not look skimpy or lopsided...it should work just fine!
Depends on the height of the table !
Most standard sizes are available through the distributors. In addition to tablecloths and napkins, runners and table skirts are available in a wide array of fabrics. Non‐standard sizes may be available upon request.