0
What else can I help you with?
Which metal has a density of about 3.1 grams per cm cubed?
If this wasn't rounded to the least number of significant figures, the answer would be Bromine. The density of Bromine is 3.12 and if that answer wasn't a rounded figure, it would 3.105882353, which can be rounded to 3.12.
What is the density of a 5kg lump of metal with the volume of 3.2m?
Nothing can have a volume of 3.2 m. If the volume were 3.2 cubic metres, the density would be 5/3.2 = 1.5625 kg per m3
How would find the mass of a metal cube?
To find the mass of a metal cube, you can use a balance scale. Simply place the cube on the scale, and it will provide the mass directly in grams or kilograms. Alternatively, if you know the density of the metal, you can calculate the mass by measuring the cube's volume (length × width × height) and using the formula: mass = density × volume.
How would you find the mass for a metal cube?
To find the mass of a metal cube, you can use the formula for mass, which is density multiplied by volume. First, measure the length of one side of the cube, then calculate the volume using the formula ( V = \text{side}^3 ). Next, determine the density of the metal (typically in grams per cubic centimeter or kilograms per cubic meter). Finally, multiply the volume by the density to obtain the mass.
A block of an unknown metal measures 5 cm x 3 cm x 2 cm the block as a mass of 235 g Of what metal do you think the block is made. Would this metal flaot or sink in mercury?
This metal would float in mercury because mercury is so dense that it would support almost any force that put upon it.
How would the density of a metal be affected if it were wet?
how would density of a metal be affected if it were wet
If an air bubble was trapped in a metal rod would it affect the rod's density?
Yes, the overall density would be less than if the rod were pure metal.
Which pairs of lab instruments would a student use to measure the density of seawater?
e2020
How you would measure the density of a metal bolt?
To measure the density of a metal bolt, you would first weigh the bolt using a scale. Then, you would measure the volume of the bolt, for example by using a water displacement method. Finally, you would calculate the density by dividing the mass of the bolt by its volume.
What is the density of a metal nut?
The density of a metal nut can vary depending on the type of metal it is made from. Common metals like steel have a density of around 7.85 g/cm^3, while lighter metals like aluminum have a density of about 2.7 g/cm^3. To determine the exact density of a specific metal nut, you would need to know its material composition.
What is the density of 48 g of a metal raises the level of water in a graduate cylinder from 25 ml?
The density of the metal can be calculated by dividing the mass of the metal (48 g) by the volume of water displaced (25 ml). The density would be 1.92 g/ml.
What volume of water would be displaced by 13.3543 g of a metal with a density of 7.51?
The first step is to calculate the volume of the metal using its density and mass. Volume = mass / density = 13.3543 g / 7.51 g/cm^3 = 1.779 cm^3. Therefore, 1.779 cm^3 of water would be displaced by the metal.
Which tools would you need to have to find the density of a solid rectangular block of wood?
on a balance
What did metal workers do in ancient Mesopotamia?
They would probz use metal and use special tools to craft them into the artifacts they are.
What supplies would slaves have in the civil war?
They slaves would have tools such as sticks, bones,metal.
What tools would you use for cutting fruit what would they be made of?
knife, they are made up of metal
How much does a piece of metal weigh?
That would vary greatly depending on the type and density of the metal, along with the dimensions of the particular piece. The weight of a piece of anything is the volume times the density.
