0
What else can I help you with?
What is the density of brass in grams per cubic inch?
The density of brass typically ranges from about 8.4 to 8.7 grams per cubic centimeter. To convert this to grams per cubic inch, you can use the conversion factor of 1 cubic inch being approximately 16.387 cubic centimeters. Thus, the density of brass is approximately 0.485 to 0.530 grams per cubic inch.
What liter is the 91 CID?
The 91 CID (cubic inch) engine displacement is approximately 1.5 liters. To convert cubic inches to liters, you can use the conversion factor where 1 cubic inch is equal to 0.0163871 liters. Therefore, 91 CID multiplied by this factor gives you roughly 1.49 liters, which is commonly rounded to 1.5 liters.
How big in ft is a 25 cubic feet refrigerator in width height and depth?
Since the refrigerator is cubic, its width, height and depth are equal. Therefore, one of the refrigerator's sides is equal to the cube root of 25 = 2.92. Therefore, the width, height and depth of a 25 cubic feet refrigerator are 2.92 feet.
How much does 1 inch by 1inch by 1 inch of water weigh?
A1. Being 2.54x2.54x2.54 cm3 it must weigh 2.54x2.54x2.54 grams.A2. And as you know, a gallon of water weighs 10 lbs, and there are 6.25 gallons of water in a cubic foot. And a cubic foot contains 12^3 cubic inches = 1728 cu in.So we have more than enough data, so a cubic inch is 1/1728 of a cubic foot, and a cubic foot weighs 62.5 lbs. So just divide 62.5 by 1728, and there is your answer.Unless of course, you don't use an imperial gallon, in which case you'll appreciate the increasingly broad acceptance of SI units. And accept A1 above.
How many gallons of liquid are use to cover 10000 sq ft at one quarter of an inch deep?
1295.6 Imperial gallons or 1555.95 US Gallons ---- A quarter of an inch is 0.020833 feet. So the total volume is 10,000 x 0.020833, or 208.33 cubic feet. A cubic foot is about 7.4805 US gallons. So, 208.33 cubic feet is approximately 1558.44 US gallons.</
How much wattage does a Sanyo bar refrigerator use?
Wattage of a Sanyo Bar Fridge ,please?
What is the recommended wattage for a refrigerator light bulb, specifically for a 40 watt refrigerator light bulb?
The recommended wattage for a refrigerator light bulb is typically around 40 watts. It is best to use the same wattage as the original bulb to ensure proper lighting and avoid any potential issues with the refrigerator.
What type of bulb should I use for my Frigidaire refrigerator?
For your Frigidaire refrigerator, you should use an appliance bulb that is compatible with the specific wattage and size requirements of your refrigerator's lighting fixture.
What is the recommended wattage for a refrigerator light bulb, specifically for a 40 watt bulb?
The recommended wattage for a refrigerator light bulb is typically around 40 watts. It is best to use the same wattage as the original bulb to ensure proper lighting and avoid any potential issues.
How much wattage does a 15 yr old refrigerator use?
400 Kwh ( 120 Liter )
What size engines did they use in 1982?
In the 1982 Ford 1/2 ton truck a 4.9 L - 300 cubic inch - straight 6 cylinder a 3.8 L - 232 cubic inch - V6 a 4.2 L - 255 cubic inch - " V8 " a 5.0 L - 302 cubic inch - V8 a 5.8 L - 351 cubic inch - V8 a 6.6 L - 400 cubic inch - V8 ?
How many cc's in a 95 cubic inch Harley motorcycle?
To convert cubic inches to cubic centimeters (cc), you can use the conversion factor where 1 cubic inch is approximately 16.387 cc. Therefore, a 95 cubic inch Harley motorcycle has about 1,553 cc (95 x 16.387).
What is the density of brass in grams per cubic inch?
The density of brass typically ranges from about 8.4 to 8.7 grams per cubic centimeter. To convert this to grams per cubic inch, you can use the conversion factor of 1 cubic inch being approximately 16.387 cubic centimeters. Thus, the density of brass is approximately 0.485 to 0.530 grams per cubic inch.
How many watta can 1.3 amp refrigerator use in a month?
To calculate the wattage used by a 1.3 amp refrigerator in a month, you first need to determine its wattage. Using the formula: Watts = Amps × Volts, and assuming the refrigerator operates at 120 volts, it would use approximately 156 watts (1.3 A × 120 V). If the refrigerator runs 24 hours a day, it would consume about 112.32 kWh in a month (156 watts × 24 hours × 30 days ÷ 1000).
What size water line should I use for connecting a refrigerator to the water supply?
For connecting a refrigerator to the water supply, it is recommended to use a 1/4 inch water line.
What car company was the first to use the 455 cubic inch motor?
Oldsmobile in 1968.
How many watts does a compact refrigerator use?
A compact refrigerator typically uses around 50-100 watts when running. The exact wattage can vary depending on the size and efficiency of the refrigerator.
