300 gallons
at 128 ounces per gallon, you need 600/128 = 4.7 gallons,or about 5 gallons
One cubic foot of water is 7.4805 gallons.
If a car can go 150 miles on 5 gallons then it will travel 600 miles on 20 gallons of gas
That would be about 375 gallons. Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon.
600 pounds of water is equivalent to approximately 71.6 gallons.
Around 600 pounds ... It depends on the type of water ... just round it up to 600 :)
The weight of 100 gallons can vary depending on what is being measured. For water, 100 gallons weigh approximately 834 pounds. For gasoline, 100 gallons weigh around 600-650 pounds. It is important to note that the weight of 100 gallons might differ for other liquids or substances.
600 US quarts = 150 US gallons
600 gallons = 76,800 fluid ounces
300 gallons
Water weighs 10 pounds per gallon, so 600 gallons would weigh 6000 pounds or three tons. Adding the weight of the container, and then look for a system that can transport it, meaning not just the axle capacity, but all of the components like suspension, wheels and bearings and the bed of the truck or trailer the weight is resting on. Good luck with that.
600 US gallons is 23hL
9794 lb.
600 US gallons is 2,271,247.07 mL
The weight of 4 gallons of water is about 33.6 pounds (8.34 pounds per gallon).
Not very much at all. When the "start" of the water flow hits the end point it will be very low; but the weight if the water itsself will be very high.