To measure the diameter of a nickel, you can use a caliper for precise measurement, as it provides an accurate reading of the coin's width. Alternatively, a ruler can be used for a rough estimate by placing the nickel flat against the ruler's edge. A micrometer could also be employed for even greater accuracy if needed.
If you were to calculate the mass of a nickel you would use grams or milligrams if you were to measure the diameter of a nickel you would use millimeters.
well it depends. The material coins are made of is different. Nickel or copper. Therefore pounds. OR The circumference. Diameter X Pi.(3.141...).
The diameter of a US nickel is 21.21 millimeters.The united states Nickel has a diameter of 21.21 mm or 2.2121 cm.
You would measure a nickel in a Graduated Cylinder. Coins are normally measured in grams for weight and mm for diameter and thickness. A U.S. nickel weighs 5 gm, is 21.2 mm in diameter, and is 2 mm thick.
The diameter of a nickel is 2.121 cm.To find the perimeter of the nickel, we will use the equation 2(Pi)rTo find the radius, r, divide the diameter by 2.2.121/2=1.0605P = 2(3.14159)(1.0605)= 6.6633 cmTherefore, the perimeter of a nickel is approximately 6.66 cm.
If you were to calculate the mass of a nickel you would use grams or milligrams if you were to measure the diameter of a nickel you would use millimeters.
a scale. A US nickel weighs exactly 5 grams.
well it depends. The material coins are made of is different. Nickel or copper. Therefore pounds. OR The circumference. Diameter X Pi.(3.141...).
The diameter of a US nickel is 21.21 millimeters.The united states Nickel has a diameter of 21.21 mm or 2.2121 cm.
You would measure a nickel in a Graduated Cylinder. Coins are normally measured in grams for weight and mm for diameter and thickness. A U.S. nickel weighs 5 gm, is 21.2 mm in diameter, and is 2 mm thick.
The diameter of a nickel is 21.21 mm.
To measure the handlebar diameter of your bike, use a caliper or ruler to measure the width of the handlebar at the center where it is thickest. This measurement will give you the diameter of the handlebar.
Diameter tools
The diameter of a nickel is 2.121 cm.To find the perimeter of the nickel, we will use the equation 2(Pi)rTo find the radius, r, divide the diameter by 2.2.121/2=1.0605P = 2(3.14159)(1.0605)= 6.6633 cmTherefore, the perimeter of a nickel is approximately 6.66 cm.
A US nickel has a diameter of 21.21mm
Use a tape measure !
To accurately measure the diameter of motorcycle handlebars, use a caliper tool to measure the width across the handlebars at the center point. This will give you the precise diameter measurement.