0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How much is 4.95 percent of 9600?
4.95 percent of 9600 = 475.24.95% of 9600= 0.0495 *9600= 475.2
How would you write 96 as a percent?
96 = 9600%
Which is longer 6.9 km or 9600 m?
9600 m
What is 9600 in scientific notation?
9600 in Scientific Notation = 9.6 x 103
How many miles are in 9600 feet?
according to my calculator, 9600 feet = 1.81818181818181818181818181818 miles there are 5280 feet in a mile, so 9600 / 5280 = 1.81818181818181818181818181818
Is cable modem a broadband communication type?
Yes - generally speaking - anything above 9600 baud is considered "broadband" - becasue 9600 baud is as fast as federal law allows - by the old standard. Cable is usually at least 2,400,000 baud or 2.4 gig - depending upon your carrier and their pricing.
What baud rate needs to be configured on terminal emulation software to allow a connection to the console port of a router?
The default speed is 9600.
What band rate needs in terminal emulation software?
Its not band rate but its baud rate and it should be 9600 in the terminal emulation software to work with cisco devices.
Define bit rate?
Bit rate would be the number of bit processed per time frame, normally per second Old modems commonly worked as 4800 Baud or 9600 Baud which would be 4800 bits per second and 9600 bits per second respectively
Data rate of a channel?
A signal's data rate is often confused with its baud rate rate. The two are closely linked but are not identical. The data rate is a measure of how many bytes or bits of data can be sent per second. The baud rate, on the other hand is a measure of how many physical bits are sent per second, including start and stop bits and other idle bits. The baud rate is therefore higher than the data bit rate. A typical asynchronous serial signal that runs at a rate of 9600 baud will carry ten bits for every byte of data sent. One bit is a start bit. Another is the stop bit and the remaining eight are the eight bits of data. The bit rate is actually 8/10 x 9600 = 7680 bits per second. Most transmission methods have an overhead that makes the data rate a little slower than the baud rate. In time critical applications, the difference between them can become significant.
How much is 4.95 percent of 9600?
4.95 percent of 9600 = 475.24.95% of 9600= 0.0495 *9600= 475.2
What baud rates are supported by the USB to Serial Cable?
It supports from 300 baud to 1M baud.
What type of transmission is measured by baud rate?
The speed of any type of digital data transmission can be measured in baud. However this unit is usually applied only to serial communication channels carried via a single line (thus can only have one state at each point in time). While this unit is not usually applied to parallel communication channels carried via multiple lines (thus can have a different state on each of these lines at each point in time, making the actual baud rate of the channel the number of lines multiplied by the baud rate of one line).Baud = state changes per second. Not bits per second!!An example is the telephone modem. Because the bandwidth of a telephone signal is limited to 3KHz, the maximum possible speed is 2400 baud. However much higher bit per second rates are possible by using very complicated states (e.g. different signal amplitudes, different signal phases) and sometimes data compression algorithms.For example with 4 different amplitudes and 4 different phases that can be used to represent a state, 16 different states (4 bits) can be transmitted for each baud. This would allow a telephone modem (limited to 2400 baud by the bandwidth limitation of the telephone line) to transmit 9600 bits per second.For example with 8 different amplitudes and 8 different phases that can be used to represent a state, 256 different states (8 bits, 1 byte) can be transmitted for each baud. This would allow a telephone modem (limited to 2400 baud by the bandwidth limitation of the telephone line) to transmit 19200 bits per second.
How would you write 96 as a percent?
96 = 9600%
What is 16.2 percent of 9600?
16.2% of 9600 = 9600*16.2/100 = 1555.2
Can't retrieve codes on obdII gmc sierra with a scanner?
2 things 1. port assignment and 2. baud rate............. usually port 3 and usually low baud like under 9600 or 4800 I forget cause mine is all set up and works on my sierra. initial setup sequence is important like cable to box to cable to port. proper sequence is on net
When was Frédéric Baud born?
Frédéric Baud was born in 1975.
