You would certainly use an op-amp or an operational amplifier, if two opposite sides which successfully met and made operations correctly with no bugs.
You would use area. I would use the meter2. Okay
If I was you i would use millimetres or centimetres.
who would use the word "quadrant"
I would use a micrometer. A caliper would do as well.
You would possibly use a chronometer which is an extrememely accurate clock.You would possibly use a chronometer, a very accurate clock.
A: Any offset whether is voltage or current is an output error to contend with.
A comparator is simply an opamp with a certain configuation of external circuitry ( a few components) that make it function as a comparator.
no, the 741 opamp is a monolithic IC.
It is an opamp chip consisting of 8 pins
A practical opamp is designed to approach the characteristics of the ideal opamp as closely as possible. The open loop voltage gain of an ideal opamp is infinite, so while this is actually impossible to achieve practical opamps are built with as high an open loop voltage gain as possible.
An opamp has a ground terminal on one of the pins.
741 opamp
yes, with additional circuitry. an opamp wired as a differentiator followed by an opamp wired as a comparator can provide short timing periods. an opamp wired as an integrator followed by an opamp wired as a comparator, plus some other circuits left as an exercise to the reader can provide long timing periods.
An opamp buffer circuit is one where the input signal is connected to the plus input, and the output is connected to the minus input. Within the performance limitations of the opamp, the output will track the input. The advantage of the buffer circuit is that is presents very little load impedance to the input signal, while providing a low impedance from the output to drive whatever circuitry is connected there.
Possibly Linear, in which case it means analog. The LM324 is an opamp.
opamp is a device used to amplify ac as well as DC input signals. It is called as operational amp becoz it is used to perform all mathematical operations. Symbol of opamp indicates the direction of current.
Feed back resistance plays the vital role of controlling output of the OPAMP. Also surrounding temperatures affects the out put of OPAMP. ANSWER: The gain drives the output to either B+ or B- minus the saturation of the output circuitry