Best Answer

Since round table cloths are measured on the diameter, not the circumference, you would fold it in half twice, measure 30 inches from the center of the cloth, add 1 1/2 inches for the hem, and that is where you start your cut.

You don't measure up from the bottom because you can't be sure if they added the hem before or after their measurement.

Q: When cutting a 70 inch round table cloth down to a 60 inch tablecloth how many inches do you cut off?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

One can buy a 90 inch round tablecloth online when one goes to the website of Linen Tablecloth. Price starts at $10. The most expensive one is only $20.

It depends on what units are used for the measure of 120. Is it 120 inches, 120 centimetres, etc. Second, in terms of purchasing a length of fabric, it also depends on the width of the fabric.

The basic difference between oblong and oval is the shape at the short end. i.e. An oval is rounded at the short end and straight in the middle. To draw them it can be represented as [] =oblong (rectangular) & 0 =oval A true oval tapers to the ends, while an oblong shape has parallel sides (an oblong is an extended square or circle). So if your intent is to put a tablecloth on a round table after adding leaves, an oblong tablecloth would be best. An oval tablecloth of the right length might not be wide enough at some points, and the problem gets worse as you add more leaves. That said, the tablecloth sellers I looked at online all make their "oblong" tablecloths as rectangles, not elongated circles. If you want an elongated circle, to provide even overhangs on a circle with leaves, use a custom tablecloth site. Here is a table linens size chart that may be of some help. http://www.TableclothsForLess.com/tablecloth-sizes.html

Round about 31 inches

39.3700787 Inches You could round that to get 39.4

Related questions

84 inches round tablecloth gives a drop of 12 inches for 60 inch round table. If you want the drop up to the ground,120 inches round tablecloth is perfect fit. (above tablecloth sizes is applicable only to the std height table 29 inches)

If the table height is 29 inches then 132 inches tablecloth perfect fit and it will give drop up to the ground.

If the table is 42 inches in diameter and the height is 29 inches then 102 inch tablecloth is perfect fit which gives drop to the ground.

For a 72-inch round table, a tablecloth that is at least 120 inches round or square would be suitable. This allows for a 24-inch overhang around the table, providing a stylish and practical look for your table setting.

If the table height is standard 29 inches, if you want the drop up to the ground, you require 132 inch round tablecloth and if you want the drop half the way (i.e 15 inches) then 102 inch round tablecloth is perfect fit.

No because a round table with a circumference of 60 inches has an area of just over 286 square inches.

If you are making a rectangular 9 ft. tablecloth, you will probably need a little more than 9 ft. of fabric to allow for turning under and finishing your two ends. I would suggest 3 yards (9 ft.) plus another 6 in. to allow for turning under 1" and finishing your two ends with 2" hems.

Assuming 82 and 72 are in the same system of measurement, yes. But an 82 centimetre table cloth will not fit a 72 inch table.

The weight of a 120-inch round tablecloth can vary depending on the material it is made of, but a general estimate would be around 2-4 pounds. This weight can also be influenced by factors such as thickness and any additional embellishments on the tablecloth.

One can buy a 90 inch round tablecloth online when one goes to the website of Linen Tablecloth. Price starts at $10. The most expensive one is only $20.

Take advantage of fantastic deals on a broad selection of fabric at Amazing Warehouse Inc.! From elegant Satin to soft Chiffon, discover all the fabric you need. Shop now for great savings and first-rate service. amazingwarehouseinc. com/collections/tablecloth-round

That completely depends on the height of table top above the floor. The width of the tablecloth needs to be the width of the table (60") plus twice the height from the floor. So, if the height from the floor is 30", the tablecloth needs to be 120" wide.