What is the difference between output and input?If you sing into a microphone you can hear the microphone's output.Sound coming out of the power amp to the speakers.That is the input of the loudspeaker.Do you see the difference?Your voice is the microphone's input. Its output is electrical impulses that are input to the amplifier. The amplified impulses are the output of the amplifier and input to the speaker. Sound waves are output of the speaker and input to your ears.
It is the process which converts the input to output.
3n + 4
The definiton of input number is the number going in. The input number is the oppsite of the output number. For instance:Input Output1 52 103 154 205 25The rule of the input and output number is input times five equals output.
If every input has an output. If two outputs are the same, they must have the same input.
An output force is the force that is exerted from the input force to create motion of the resisting object. the input force can be less or more then the output force
Input force is the force applied to an object, while output force is the force exerted by the object in response. In a simple machine, the input force is the force applied to it, and the output force is the force produced by the machine to do work. The relationship between input and output forces determines the efficiency of a machine.
The formula for work exerted by each simple machine is: Lever: Work = Input force × Input distance = Output force × Output distance Inclined plane: Work = Input force × Input distance = Output force × Output distance Pulley: Work = Input force × Input distance = Output force × Output distance Wheel and axle: Work = Input force × Input radius = Output force × Output radius Wedge: Work = Input force × Input distance = Output force × Output distance Screw: Work = Input force × Input distance = Output force × Output distance
In a compound machine, the input force is the force applied to the machine, while the output force is the force exerted by the machine to do work. The relationship between input and output forces depends on the configuration of the machine. In general, the output force of a compound machine is the combined output forces of its individual parts, which may result in a mechanical advantage that allows the machine to perform work more easily.
The applied force to the end of the handle is the input force and the output force is when the broom sweeps over the floor.
levers are classified by the locations of the input and output forces relatively to the fulcrum
Every real machine is subject to forces that reduce output. These include actual forces such as friction, or human controlled forces such as imperfect machining. This reduces the output to less than the ideal.
The ratio of the output to input forces may help you there.
A pulley with a mechanical advantage of 1 means that the input force is equal to the output force. Essentially, the forces required to lift an object using the pulley are the same on both sides, making it easier to lift the load.
The output force is greater than the input force for a single fixed pulley. This is due to the mechanical advantage provided by the pulley system. For a pizza cutter, hockey stick, and screw, the output force is typically equal to or less than the input force.
Input and output are shown on a force diagram by the human being the input force and the load force being the output force. When you divide output force by input force, you get the mechanical advantage of a lever.
The input force is applied at the top of the screwdriver handle by the user's hand. The output force is exerted at the tip of the screwdriver where it makes contact with the screw, allowing it to be twisted into the piece of wood.