answersLogoWhite

0

the input force for a screw is the top when you use a drill or screwdriver to screw it into the object. The output is when the object goes into the wood or etc. It transfers the force to the object. I learned this in 7th grade science 3 weeks ago. I'm positive it's the right answer.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What is the output and input forces?

An output force is the force that is exerted from the input force to create motion of the resisting object. the input force can be less or more then the output force


What are input and output forces?

Input force is the force applied to an object, while output force is the force exerted by the object in response. In a simple machine, the input force is the force applied to it, and the output force is the force produced by the machine to do work. The relationship between input and output forces determines the efficiency of a machine.


What is the formula of each simple machine by getting the work exerted by the machine?

The formula for work exerted by each simple machine is: Lever: Work = Input force × Input distance = Output force × Output distance Inclined plane: Work = Input force × Input distance = Output force × Output distance Pulley: Work = Input force × Input distance = Output force × Output distance Wheel and axle: Work = Input force × Input radius = Output force × Output radius Wedge: Work = Input force × Input distance = Output force × Output distance Screw: Work = Input force × Input distance = Output force × Output distance


How are the input and output forces of the parts of a compound machine relate?

In a compound machine, the input force is the force applied to the machine, while the output force is the force exerted by the machine to do work. The relationship between input and output forces depends on the configuration of the machine. In general, the output force of a compound machine is the combined output forces of its individual parts, which may result in a mechanical advantage that allows the machine to perform work more easily.


A broom is an example of machine where are the input and output forces applied?

The applied force to the end of the handle is the input force and the output force is when the broom sweeps over the floor.


How are levers classified?

levers are classified by the locations of the input and output forces relatively to the fulcrum


How do you calculate the mechanical advantage of any machine if you only know the forces?

The ratio of the output to input forces may help you there.


Why is the output work in a machine always less than the input work?

Every real machine is subject to forces that reduce output. These include actual forces such as friction, or human controlled forces such as imperfect machining. This reduces the output to less than the ideal.


Is the output force greater than the input force for a pizza cutter a hockey stick a single fixed pulley or a screw?

The output force is greater than the input force for a single fixed pulley. This is due to the mechanical advantage provided by the pulley system. For a pizza cutter, hockey stick, and screw, the output force is typically equal to or less than the input force.


A pulley has a mechanical advantage of 1. What does this tell you about the size and direction of the input and output forces?

A pulley with a mechanical advantage of 1 means that the input force is equal to the output force. Essentially, the forces required to lift an object using the pulley are the same on both sides, making it easier to lift the load.


How is input and output shown on a force diagram?

Input and output are shown on a force diagram by the human being the input force and the load force being the output force. When you divide output force by input force, you get the mechanical advantage of a lever.


Is an OMR an input or output?

is an omr and input or output device?