Wiki User
∙ 17y agothe casting number is located on the drivers side at the very back of the block on the top. it will be right above the bell housing. also on the front of the block in front of the head where the head fits on the block will be a series of numbers that will tell you if the engine had a 2 bbl carb. or a 4 bbl carb. and if the car came with ac. again this is on the drivers side.
Wiki User
∙ 17y agoThese filters are externally the same. Might be some internal difference. Both work on a small block Chevy. EDIT: According to the fram website these filters are the same basic size but the PH5 has an antidrainback valve and the PH13 does not.
millimetres or centimetres.
A small number
a modified engine has a big block bolt pattern for a big block transmission.a 300 has a small block pattern.unless there is some kind of adapter it will not fit.
406 cubic inches .
Yes.
A small block. It is the first motor squared, by Chevy, meaning it has a 4 inch bore, and 4 inch stroke.
NO. Not even close.
The 400 Chevy small block motor should have approximately 390 horse power. It should have 427 foot pounds of torque.
It will be on the right side of the block where the head bolts on. with right head on engine the block will stick out a little bit in the front the # will be right there. may have to clean or sand block to read.
motor #3978010
no
When the center exhaust valves are side by side (siamese), it's a small block (EIIEEIIE). Big blocks are symmetrical (EIEIEIEI).
Everything is different in that motor.
part number after they machine it
LT 1.Rated at 275HP."Second generation" of the Chevy small block.
The numbers on the drivers side rear of the engine right above the bellhousing are more helpful.