0
On a standard ruler, the 1/10 inch mark is typically located between the 1/8 inch and 1/4 inch marks. Rulers usually do not have a specific line for 1/10 inch, as they are commonly marked in increments of 1/8, 1/16, and 1/4 inches. To approximate 1/10 inch, you can visually estimate it as slightly less than 1/8 inch.
What else can I help you with?
Where on a ruler is 1.125 inches?
To find 1.125 inches on a ruler, first locate the 1-inch mark. From there, move an additional 0.125 inches, which is equivalent to 1/8 of an inch. This will place you at the first small mark after the 1-inch mark, which is typically the third mark on the ruler after the 1-inch line. Therefore, 1.125 inches is just past the 1-inch mark, at the first eighth mark.
What does .375 inch look like on a ruler?
On a ruler, .375 inches is equivalent to 3/8 of an inch. It is located between the 1/4 inch mark (0.25 inches) and the 1/2 inch mark (0.5 inches). Specifically, it is three tick marks past the 1/4 inch mark. If using a standard ruler, you'll find it slightly closer to the 1/2 inch mark than to the 1/4 inch mark.
Where On a ruler where would five eights of an inch be?
Five eighths of an inch on a ruler would be located between the half-inch mark and the three-quarter inch mark.
Where is 0.166 inches on a ruler?
To find 0.166 inches on a ruler, locate the 1/8-inch mark, which is 0.125 inches. Then, estimate a little less than halfway between the 1/8-inch mark and the 1/4-inch mark (0.25 inches). The 0.166 inches is slightly closer to the 1/8-inch mark than to the 1/4-inch mark.
Where is 7.9 inches on ruler?
On a standard ruler, 7.9 inches would fall between the 7-inch mark and the 8-inch mark. Each inch on a ruler is divided into 16 equal parts, so 0.9 inches would be just slightly before the 1-inch mark after the 7-inch mark. To locate 7.9 inches precisely, you would count 7 full inches and then estimate just under a tenth of an inch beyond the 7-inch mark.
Where on a ruler is 1.125 inches?
To find 1.125 inches on a ruler, first locate the 1-inch mark. From there, move an additional 0.125 inches, which is equivalent to 1/8 of an inch. This will place you at the first small mark after the 1-inch mark, which is typically the third mark on the ruler after the 1-inch line. Therefore, 1.125 inches is just past the 1-inch mark, at the first eighth mark.
What does .375 inch look like on a ruler?
On a ruler, .375 inches is equivalent to 3/8 of an inch. It is located between the 1/4 inch mark (0.25 inches) and the 1/2 inch mark (0.5 inches). Specifically, it is three tick marks past the 1/4 inch mark. If using a standard ruler, you'll find it slightly closer to the 1/2 inch mark than to the 1/4 inch mark.
Where On a ruler where would five eights of an inch be?
Five eighths of an inch on a ruler would be located between the half-inch mark and the three-quarter inch mark.
Where is 1.01 on the ruler?
On a standard ruler, 1.01 would be just slightly past the 1-inch mark. Since most rulers have markings for each tenth of an inch, you would locate the 1-inch mark and then move a tiny bit past the first marking (which represents 1.0 inches) to find 1.01 inches. It's a small distance, roughly one-hundredth of an inch beyond 1 inch.
Where is 0.166 inches on a ruler?
To find 0.166 inches on a ruler, locate the 1/8-inch mark, which is 0.125 inches. Then, estimate a little less than halfway between the 1/8-inch mark and the 1/4-inch mark (0.25 inches). The 0.166 inches is slightly closer to the 1/8-inch mark than to the 1/4-inch mark.
where is 1.18 inches on a ruler?
1.18 inches on a ruler would be located between the 1 inch and 2 inch markings on the ruler. It would be slightly closer to the 1 inch mark than the 2 inch mark. Keep in mind that most rulers are divided into 16 equal parts per inch, with each tick mark representing 1/16 of an inch. So, on a standard ruler, the 1.18 inches mark would be located slightly beyond the 18/16 (1.125) mark and slightly before the 19/16 (1.1875) mark.
Where is 7.9 inches on ruler?
On a standard ruler, 7.9 inches would fall between the 7-inch mark and the 8-inch mark. Each inch on a ruler is divided into 16 equal parts, so 0.9 inches would be just slightly before the 1-inch mark after the 7-inch mark. To locate 7.9 inches precisely, you would count 7 full inches and then estimate just under a tenth of an inch beyond the 7-inch mark.
Where is 1.93 inches on ruler?
To find 1.93 inches on a ruler, first locate the 1-inch mark and then the 2-inch mark. Since 1.93 inches is just under 2 inches, you should measure 0.93 inches past the 1-inch mark. This is slightly less than a full inch, so it will be just short of the 2-inch mark, positioned between the 1.9 and 2-inch marks on the ruler.
Where is 1.708 inches on a ruler?
On a standard ruler, 1.708 inches would fall between the 1 11/16 inch mark and the 1 3/4 inch mark. To locate 1.708 inches precisely, you would need to estimate between these two marks based on the incremental markings on the ruler. It would be closer to the 1 11/16 inch mark but not quite reaching the 1 3/4 inch mark.
1.9 inches on a ruler how do you find that?
The answer depends on the ruler. Some rulers may be marked with inches along one side. Of these, some will be marked in tenths of an inch. These will usually say "TENTH" or "1/10" near the start of the numbering. If so, look for the number 2 and look for the small line just before it.
Where is 1 fifth on a ruler?
Look at the markings between zero inches and one inch. There should be a larger mark right in the middle between the two. That's 1/2 (one half) inch. Right in the middle between 0 and 1/2 is a smaller mark - that's the 1/4 (one quarter) inch mark. On the other hand, the mark halfway between 1/2 and 1 inch is the 3/4 (three quarter) inch mark. In other words, the distance from zero to one inch can be divided into four equal steps with three marks in between; those are, respectively, 1/4 inch, 2/4 inch (= 1/2 inch), and 3/4 inch. 4/4 inch is equal to 1 inch.
Where is 1.18 inches on a ruler?
On a standard ruler, 1.18 inches would fall between the 1 inch mark and the 2 inch mark. Each inch on a ruler is divided into 16 equal parts, known as sixteenths. So, 1.18 inches would be located 3/16 of an inch past the 1 inch mark. It can also be expressed as 1 inch + 3/16 inch.
